Sony MDS-JE500 Monitoring the input signal Input Monitor, Playing back tracks just recorded

Page 10

Recording on MDs

Monitoring the input signal (Input Monitor)

Before starting recording, you can monitor the selected input signal through the deck’s output connectors.

1Press ¤EJECT to remove the MD.

2Set INPUT according to the input signal you want to monitor.

When INPUT is at ANALOG

TheanalogsignalinputthroughLINE(ANALOG)INis

outputtoDIGITALOUTafterA/Dconversion,and

thentotheLINE(ANALOG)OUTconnectorsand

PHONESjackafterD/Aconversion.

When INPUT is at DIGITAL

ThedigitalsignalinputthroughDIGITALINisoutput toDIGITALOUT,andthentotheLINE(ANALOG) OUTconnectorsandPHONESjackafterD/A conversion.

Note

EvenifyousetRECMODEtoMONO,themonitor

signaldoesnotbecomemonaural.

3Press r REC.

If INPUT is at ANALOG, “AD-DA” appears in the display.

If INPUT is at DIGITAL, “-DA”appears in the display.

If “Auto Cut” appears in the display (Auto Cut)

There has been no sound input for 30 seconds while INPUT is set to DIGITAL and the source is connected through DIGITAL IN. The 30 seconds of silence are replaced by a blank of about 3 seconds and the deck changes to recording pause.

You can turn off the Auto Cut Function

Fordetails,see“If“SmartSpace”appearsinthe

display”below.

If “Smart Space” appears in the display (Smart Space)

There has been an extended silence of 4 to 30 seconds in length when INPUT is set to DIGITAL and the source is connected through DIGITAL IN. The silence is replaced with a blank of about 3 seconds and the deck continues recording.

To turn off the Smart Space Function and Auto Cut Function

1Duringrecordingpause,pressEDIT/NOrepeatedlyuntil

“S.Space?”appearsinthedisplay.

2PressYES.

3PressEDIT/NOtodisplay“S.SpaceOFF.”

To turn on the Smart Space Function and Auto Cut Function again

1Duringrecordingpause,pressEDIT/NOrepeatedlyuntil

“S.Space?”appearsinthedisplay.

2PressYEStwicetodisplay“S.SpaceON.”

Notes

•WhenyouturnofftheSmartSpaceFunction,theAutoCut

Functionisalsoturnedoffautomatically.

•TheSmartSpaceFunctionandAutoCutFunctionare factorysettoon.

•TheSmartSpaceFunctiondoesnotaffecttheorderofthe tracknumbersbeingrecorded,eveniftheblankspace occursinthemiddleofatrack.

•IfyouturnoffthedeckordisconnecttheACpowercord,

thedeckwillrecallthelastsetting(onoroff)oftheSmart SpaceandAutoCutFunctionsthenexttimeyouturnon thedeck.

Playing back tracks just recorded

Do this procedure to immediately play back tracks that have just been recorded.

Press áimmediately after stopping recording. Playback starts from the first track of the material just recorded.

To play from the first track of the MD after recording

1 Press pagainafterstoppingrecording.

2 Press á.

PlaybackstartsfromthefirsttrackoftheMD.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MiniDisc Deck Precautions Welcome About This ManualInserting batteries into the remote UnpackingHooking Up the System OverviewConnecting the deck to an amplifier Connecting the AC power cordHookups To record Set REC Mode to To record through Set Input to When TOC flashes in the display PressPlaying an MD Do the followingUseful Tips for Recording Checking the remaining recordable time on the MDIf Smart Space appears in the display Smart Space Monitoring the input signal Input MonitorIf Auto Cut appears in the display Auto Cut Playing back tracks just recordedWhile Track flashes in the display Adjusting the Recording LevelRecording Over Existing Tracks To record from the middle of the trackTo cancel Automatic Track Marking Marking Track Numbers While Recording Track MarkingTo stop Time Machine Recording To stop Music Synchro-RecordingTo pause recording Synchro-Recording With a Sony CD PlayerIf the CD player does not start playing You can change CDs during synchro-recordingRecording on an MD Using a Timer Using the Display Checking remaining time and the title of a trackLocating a Specific Track Playing Tracks Repeatedly Locating a Particular Point in a TrackRepeating the current track Playing in Random Order Shuffle Play Repeating a specific portion A-B RepeatChecking the track order Creating Your Own Program Program PlayChanging the track order Pausing after each track Auto Pause Playing an MD Using a TimerInserting blank spaces while recording to tape Auto Space Erasing Recordings Erase Function PlayingEdit RecordedMDs MDsErasing all tracks on an MD To cancel the Erase FunctionErasing a single track Erasing a part of a trackYou can undo a track division To cancel the Divide FunctionYou can divide a track while recording To cancel the Combine Function You can undo a track combinationLabeling Recordings Title Function To cancel the Move FunctionTo label Make sure that the deck is Until To cancel labelingTo select If you entered the wrong characterLabeling tracks and MDs with the remote To select PressChanging an existing title Z Erasing all titles on a disc Name Erase FunctionMessage Meaning Display MessagesSystem Limitations Some tracks cannot be combined with othersTroubleshooting Inputs SpecificationsOptional accessories OutputsGuide to the Serial Copy Management System Index Additional Information IndexW, X, Y, Z Names of controls
Related manuals
Manual 35 pages 54.85 Kb Manual 37 pages 43.27 Kb
Top Page Image Contents