Kompernass KH 2264 Intended use Technical data, To avoid fatal danger through electric Shocks

Page 5

t

CD Stereo Radiorecorder

e-bench KH 2264

1. Intended use

2. Technical data

 

This appliance is designed for casual

Voltage:

230 V / 50 Hz

home-use. It is not designed for continual

Power consumption (rating):

12W

use or for use in a commercial or industrial

Laser class:

1

context.

 

 

Important safety information!

To avoid fatal danger through electric

shocks:

Make sure that the power cable does not get wet or damp during operation. Install the cable so that it cannot be crushed between two objects, or damaged in any other way. Should the power cable be damaged, please let our customer servi- ce replace it before using the appliance again.

Disconnect the power cable from the power supply after using the appliance. Switching the device off is not sufficient as voltage remains in the device for as long as it is connected to the mains power supply.

Make sure that no fluids or small objec- ts penetrate the interior of the device.

Only use the device in dry surroundings

To avoid fire hazard and the danger of

injuries:

Install the device in a position where the- re is no danger of heat build up - deta- ched and well ventilated. Never cover the ventilation slits!

Avoid additional heat through direct sun, heating systems, other electrical appliances etc.

Never let children and frail people handle the device without supervision, as these people may not always judge potential dangers appropriately.

The CD unit has a "class 1" laser unit. There is no immediate danger for your eyes unless the housing is incomplete or damaged - if this is the case, then the appliance must not be used at any time!

Please keep this manual in case of future queries –

and pass it on when transcribing the device to another person!

4

Image 5
Contents KH2264 Page Page Contents To avoid fire hazard and the danger Injuries Intended use Technical dataTo avoid fatal danger through electric Shocks Connecting the antenna Connecting the power cableConnecting the headphones ConnectionAdjusting the volume Switching the device on/offRadio mode OperationStored channels Call up CD modeInserting / extracting a CD Play / PauseProgramming a track list Tape modePlaying a track list Repeat functionCleaning and maintenance Using the tape unitExternal cleaning Recording from the radioCleaning the CD unit Cleaning the cassette unitTrouble-shooting Disposal