t
6.5 Programming a track list
You can program a track list with up to 16 tracks. To do this the CD has to be stopped. When a CD is inserted:
Press MEMORY.
The display now shows "Pr.01" indicating the first memory position of the track list - followed by the number of the track already allocated to this position.
Use SKIP >> or ...
the SKIP << button, you can now select the track to be played first.
Now press MEMORY again to save the selected track in position 1 of the pro- grammed track list.
Call the next program position by pressing …
SKIP >> or
SKIP << .
The display now shows the number of the next memory position.
Now select the track from the CD that you want to program in this track position o using ...
SKIP >> or
SKIP << .
Now press …
MEMORY to save this track in the positi- on previously selected.
You can check your program track list by pressing MEMORY to scan through all occupied track positions.
6.6 Playing a track list
If you have programmed a playlist, play as described in 6.5.
Press PLAY/PAUSE to start the pro- grammed playlist.
Note: The programming information all 16 track positions is deleted as soon as the CD tray is opened or the CD is stopped and ....
STOP ■ is pressed!
6.7 Repeat function
If, during playback of a track or track list … you press REPEAT …
• Once, the current track is repeated. "REPEAT" flashes on the display.
•Twice, the entire CD or track list is repeated. "REPEAT" is displayed conti- nuously during playback.
•Three times, the repeat function is deactivated. "REPEAT" is no longer dis- played.
7.Tape mode
You can play all standard tapes, as well as record from the radio and from CDs.
Select "TAPE" on the FUNCTION switch.
7.1 Inserting / extracting a tape
Keep the tape deck closed unless you are inserting or removing a tape to prevent dust from penetrating the device
Press the STOP/EJ button until you can hear the tape door unlocking and it opens automatically.
•Now insert the tape with the mechanism facing down:
•Then close the tape deck again.
8