Connecting and Playing A 1G (First Generation) iPod® Shuffle
The docking station of this system includes an Apple USB connector specifically designed for the 1G (First Generation) iPod® Shuffle with direct USB connector.
NOTE: If you have a new 2G (Second Generation) iPod® Shuffle you may connect it to the Auxiliary Input jack of this system. Please refer to the connection instructions on page 30.
IMPORTANT!
•Do not attempt to connect other portable MP3 players or portable USB drives to this iPod® Shuffle USB connector. You can connect MP3 players to the Auxiliary Input (Aux) jack of this system but not to the USB connector. This system is not compatible with portable USB storage drives that contain compressed MP3 or WMA audio files.
•The iPod® Shuffle has no interface to receive commands from an external
controller, therefore you cannot use the Band/iPod Play 
button, the
(
) or 
(
) buttons on the top panel, or the buttons on the remote control of this system to operate the iPod® Shuffle. You can only use the
controls on the iPod® Shuffle itself.
1.) Set the function switch on your iPod® Shuffle to either the Normal or Shuffle playback position and remove the protective cap.
2.) Connect your iPod® Shuffle to the USB connector on the docking station. It can only be connected one way, with the front panel of the Shuffle facing outward.
Original iPod® Shuffle
(First Generation)
Press the 
Power button on this system to turn the power ‘On’.
26
iP550_041907.p65 | 26 |
19/4/2007, 17:56