Haier HDU-42HT03/H installation manual Disposal of the old air conditioner

Page 3

Cautions

Disposal of the old air conditioner

Before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment.

It must be noticed that air conditioner system contains refrigerants, which require specialized waste disposal. The valuable materials contained in a air conditioner can be recycled. Contact your local waste disposal center for proper disposal of an old air conditioner and contact your local authority or your dealer if you have any question. Please ensure that the pipework of your air conditioner does not get damaged prior to being picked up by the relevant waste disposal center, and contribute to environmental awareness by insisting on an appropriate, anti-pollution method of disposal.

Disposal of the packaging of your new air conditioner

All the packaging materials employed in the package of your new air conditioner may be disposed without any danger to the environment.

The cardboard box may be broken or cut into smaller pieces and given to a waste paper disposal service. The wrapping bag made of polyethylene and the polyethylene foam pads contain no fluorochloric hydrocarbon.

All these valuable materials may be taken to a waste collecting center and used again after adequate recycling.

Consult your local authorities for the name and address of the waste materials collecting centers and waste paper disposal services nearest to your house.

Safety Instructions and Warnings

Before starting the air conditioner, read the information given in the User's Guide carefully. The User's Guide contains very

important observations relating to the assembly, operation and maintenance of the air conditioner.

The manufacturer does not accept responsibility for any damages that may arise due to non-observation of the following instruction.

Damaged air conditioners are not to be put into operation. In case of doubt, consult your supplier.

Use of the air conditioner is to be carried out in strict compliance with the relative instructions set forth in the User's Guide.

Installation shall be done by professional people, don't install unit by yourself.

For the purpose of safety, the air conditioner must be properly grounded in accordance with specifications.

Always remember to unplug the air conditioner before opening inlet grill. Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

All electrical ropairs must be carried out by qualified electricians. Inadequate repairs may result in a major source of danger for the user of the air conditoiner.

Do not damage any parts of the air conditioner that carry refrigerant by piercing or perforating the air conditioner's tubes with sharp or pointed items, crushing or twisting any tubes, or scraping the coatings off the surfaces. If the refrigerant spurts out and gets into eyes, it may result in serious eye injuries.

Do not obstruct or cover the ventilation grille of the air conditioner. Do not put fingers or any other things into the inlet/outlet and swing louver.

Do not allow children to play with the air conditioner. In no case should children be allowed to sit on the outdoor unit.

2

Image 3
Contents Duct Type AIR Conditioner Table of Contents Disposal of the old air conditioner Make sure the system is grounded Safety PrecautionsDo not operate the system while Machine is adaptive in following situation Parts and Functions Used to select your desired temp Parts and Functions OperationSleep Auto DRY Fan operation Auto RUN, COOL,HEAT and DRY operation Timer operation Timer ON-OFF Cooling, dehumidifying mode Heating mode This series changeover switch is set 1. on 2.OFF 3.OFF 4.OFF Cooling is not sufficient MalfunctionUnit fails to start Cooling or heating is not sufficientMalfunction This is caused by heat expansion or contraction of plastics Case of Auto mode, operation mode is changed automatiFollowings are not malfunction Water flowing sound is heardPoints to observe Care and MaintenanceHOT KEEPis operated in the following cases For Preparation of HeatingHot KeepFor inspection and maintenance Is The Unit Installed CorrectlyInstallation place When you change your address or the installation placeInstall wire controller Installation Manual For Wire ControllerHint Wire sizeShielded wire Ground HintSerious injury are listed Installation Manual For Indoor UnitHeight of ceiling Choose installation placeHanger bolts installation Preparation before installationGood piping Installation of indoor unitAdjusting to the levelness Drain PipingStiff PVC pipe put indoor side should be heat insulated Installation of air suction and discharging ductProcedures Drainage TestHm 3/n Mmxmm Chosen chart of simple ductEach bend takes as a3~4m long straight duct Square ductExamples of improper installation Operation method of fan controller Rotate this switchRefrigerant pipe HDU-42CF03/H Installation Manual For Electric WiringWiring connection Breaker CurrentHaier Group

HDU-42HT03/H specifications

The Haier HDU-42HT03/H is a cutting-edge heating, ventilation, and air conditioning (HVAC) solution designed to provide comfort and efficiency for residential and commercial spaces. This model stands out due to its innovative features, advanced technologies, and reliable performance.

One of the key features of the Haier HDU-42HT03/H is its impressive cooling and heating capacity. With a nominal cooling capacity of 4.2 kW and a heating capacity of 5.0 kW, this model is suitable for medium-sized rooms, ensuring that spaces remain comfortable regardless of outdoor temperatures. Its Inverter technology allows for precise control of the compressor speed, resulting in faster cooling and heating, less energy consumption, and quieter operation.

The unit’s energy efficiency is highlighted by its high SEER (Seasonal Energy Efficiency Ratio) and SCOP (Seasonal Coefficient of Performance) ratings, which contribute to lower electricity bills and reduced environmental impact. The HDU-42HT03/H also features a programmable thermostat, allowing users to set specific heating and cooling schedules, optimizing energy use while maintaining comfort.

For enhanced air quality, the Haier HDU-42HT03/H comes equipped with a multi-stage filtration system that effectively captures dust, allergens, and other airborne particles. This ensures that the air circulated within the space is clean and healthy, making it an excellent choice for individuals with allergies or respiratory issues.

Additional technological advancements in the HDU-42HT03/H include the use of eco-friendly refrigerant, which minimizes its impact on the environment. The model also integrates smart technology, allowing for remote operation via a smartphone application. This feature enables users to control the unit from anywhere, providing added convenience and flexibility.

In terms of design, the Haier HDU-42HT03/H is sleek and modern, allowing it to blend seamlessly into various interior styles. Its compact structure makes it suitable for a variety of installation environments, whether in homes or businesses.

Overall, the Haier HDU-42HT03/H is a top-tier HVAC solution, boasting powerful performance, energy efficiency, and user-friendly features. It is an excellent choice for anyone looking to enhance their indoor climate control with a reliable and effective system.