Operating the GrooveRise cont.
6
Operating the GrooveRise
Alarm and Alarm Mode Setting:
Press the Al1/Al2 button to enable alarm 1, alarm 2 or both.
Once you have enabled at least one alarm, press the Al Set button. Use the Al Set button to switch between the hours and minutes to set the alarm time.
Then use the Set +/- wheel to adjust the hours or minutes desired.
Set each alarm separately.
After you have set the alarm(s) press Al Mode to switch between AUX/RADIO/IPOD as the alarm type.
To set to volume of the alarm – see “Volume Setting” section.
The alarm will sound every day at the set time(s). After the alarm has gone off, it can be turned off until the next day by pushing any button except the Snooze/Nap button.