Safety Instructions

Read all of these instructions. Save them for future reference.

∙Follow all warnings and instructions marked on the device.

∙Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.

∙Do not use the device near water.

∙Do not place the device near, or over, radiators or heat registers.

∙The device cabinet is provided with slots and openings to allow for adequate ventilation. To ensure reliable operation, and to protect against overheating, these openings must never be blocked or covered.

∙The device should never be placed on a soft surface (bed, sofa, rug, etc.) as this will block its ventilation openings. Likewise, the device should not be placed in a built in enclosure unless adequate ventilation has been provided.

∙Never spill liquid of any kind on the device.

∙Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

∙The device should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

∙To prevent damage to your installation it is important that all devices are properly grounded.

∙Do not allow anything to rest on the power cord or cables. Route the power cord and cables so that they cannot be stepped on or tripped over.

∙To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or un-interruptible power supply (UPS).

∙Position system cables and power cables carefully; Be sure that nothing rests on any cables.

∙Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts resulting in a risk of fire or electrical shock.

∙Do not attempt to service the device yourself. Refer all servicing to qualified service personnel.

∙If the following conditions occur, unplug the device from the wall outlet and bring it to qualified service personnel for repair.

∙The power cord or plug has become damaged or frayed.

∙Liquid has been spilled into the device.

∙The device has been exposed to rain or water.

∙The device has been dropped, or the cabinet has been damaged.