TAB 8 | TAB 7 | TAB 6 | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
SOUNDDOCK® SERIES III DIGITAL MUSIC SYSTEM
English
Troubleshooting
Problem | What to do |
|
|
Your iPod or iPhone does not | • Remove your iPod or iPhone from the dock and check for obstructions on the connectors. Wait five |
dock properly | seconds, then line up the connector on the iPod or iPhone with the connector on the dock and firmly reseat |
| the iPod or iPhone. You may need to do this a few times. |
| • If your iPod or iPhone has a case, you may need to remove the case in order to properly dock the iPod or |
| iPhone. |
|
|
No sound | • Increase the volume setting for the system, using the SoundDock III system remote. |
| • Increase the volume on the iPod or iPhone or your second audio device, if it is playing. |
| • Make sure the system is plugged in, your iPod or iPhone or other audio device is turned on, and audio is |
| playing. |
| • Press the Play/Pause button on the remote control. Press and hold this button to hear a second device while |
| the iPod or iPhone is charging. |
| • Unplug the power cord for one minute, then plug it back in. This resets the system (you should hear a tone |
| when the system is powered back on). |
| • Make sure you have the latest version of software on your iPod or iPhone. |
|
|
Your iPod or iPhone does not | • Make sure the Playlist mode is selected on your iPod or iPhone. |
navigate playlists as expected |
|
when using the remote |
|
|
|
6