Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit and cause a fi re.
Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other places where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fi re or electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug fi rmly when unplugging the lead. Pulling the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain fl ammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that
is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service centre. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualifi ed persons.
Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.
Table of contents
Safety precautions | 3 |
| |
Placement of speakers | 4 |
| |
Preparing the remote control | 4 | ENGLISH | |
Making the connections | 5 | ||
| |||
DEMO function | 6 |
| |
Handling of the disc trays and discs | 6 |
| |
Overview of controls | 7 |
| |
Discs | 9 |
| |
Using the FM/AM radio | 11 |
| |
USB | 12 |
| |
Using the timers | 15 |
| |
Using sound effects | 16 | ESPAÑOL | |
Using the microphone | 16 | ||
| |||
Using other equipments | 17 |
| |
Troubleshooting guide | 18 |
| |
Maintenance | 19 |
| |
When moving the unit | 19 |
| |
Specifications | 20 |
|
ESPAÑOL
ESPAÑOL
RQTX0271 ESPAÑOL
3
5/6/09 10:58:22 AM |