Using other equipments
Note:
All peripheral components and cables are sold separately.
Avoid interfering with other Panasonic equipment
Connecting to other external unit
You can connect to an analogue player with a
ENGLISH
Other Panasonic audio or video equipment may start functioning when you operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control operating mode to “REMOTE 2”.
The main unit and remote control must be set to the same mode.
1 Press and hold [MUSIC PORT] on the main unit and [2] on the remote control until the main unit’s display shows “REMOTE 2”.
2 Press and hold [OK] and [2] on the remote control for at least 2 seconds.
“LINE OUT”
position
Analogue player (not included)
Rear panel of this main unit
(R)
(L)
ESPAÑOL
To change the mode back to “REMOTE 1”, repeat both steps above by replacing [2] with [1].
Connecting to a portable audio equipment
This feature enables you to enjoy music from a portable audio equipment.
Portable audio equipment (not included)
Audio cord (not included)
Playing a portable audio equipment
Switch off the equaliser function (if there is any) of the portable audio equipment before you plug into the MUSIC PORT jack. Otherwise, sound from the speaker may be distorted.
1 Plug the audio cord into the MUSIC PORT jack.
2 Press [MUSIC P.] (main unit: [MUSIC PORT]) to select “MUSIC PORT”.
3 Play the portable audio equipment. (See the portable audio equipment’s instruction manual.)
Playing an external unit
1 Press [AUX] to select “AUX”.
2 Start playback from the external source.
Note:
•For details, refer to the instruction manual of the unit which is to be connected.
•When units other than those described above are to be connected, please consult your audio dealer.
•Sound distortion may occur when you use an adaptor other than the one supplied.
ESPAÑOL
ESPAÑOL
RQTX0271 ESPAÑOL
17
5/6/09 11:00:22 AM |