Operation
Sleep Operation
Before going to bed, you can simply press the SLEEP button and unit will operate in SLEEP mode and bring you a sound sleep.
Use of SLEEP function
After the unit starts, set the operation status, then press SLEEP button before which the clock must be adjusted and time being set. Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts, temp. will become 1OC higher than temp. setting. After another 1 hours, temp. rises by 1OC further.
The unit will run for further 6 hours then stops. Temp. is higher than temp. setting so that room temperature won't be too Iow for your sleep.
Remote Controller
FRESH
POWER/SOFT
SLEEP operation starts | SLEEP operation stops |
|
| Approx.6hrs |
| 1 hr | Rises 1OC |
1 hr | Rises 1OC | |
|
| |
Temp.setting |
| Unit stop |
|
| |
In COOL, DRY mode
2.In HEAT mode
1 hours after SLEEP mode starts, temp will become 2 OC lower than temp. setting. After another 1 hours, temp decrease by 2 OC further. After more another 3 hours, temp. rises by 1OC further. The unit will run for further 3 hours then stops. Temp. is lower than temp. setting so that room temperature won't be too high for your sleep.
Temp.setting | Unit stop | ||
1 hr | Decreases 2OC |
| |
| 1 hr |
| |
| Decreases 2OC | ||
|
| 3 hrs | |
| 3 hrs | Rises 1OC | |
SLEEP |
| SLEEP | |
| operation stops | ||
operation starts | |||
| |||
In HEAT mode
3.In AUTO mode
The unit operates in corresponding sleep mode adapted to the automatically selected operation mode.
4.In FAN mode
It has no SLEEP function.
5.Set the wind speed change when sleeping
If the wind speed is high or middle before setting for the sleep, set for lowing the wind speed after sleeping.
If it is low wind, no change.
23