Drain Piping, Installation of indoor unit

Installation Manual For Indoor Unit

4. Installation of indoor unit

M10 nut

Fix the indoor unit to the hanger bolts.

If required, it is possible to suspend the unit to the beam, etc. Directly by use of the bolts without using the hanger bolts.

Main unit

Note

Hanging bolt M10 washer

M10 spring washer

When the dimensions of main unit and ceiling holes does not match, it can be adjusted with the slot holes of hanging bracket.

Adjusting to the levelness

(a)Adjust the out-of levelness using a level or by the following method.

Make adjustment so that the relation between the lower surface of the unit proper and water level in the hose becomes as given below.

Piping side

Supply water

Water level

	0~5 mm	PVC hose
	(0~0.2")	PVC hose
	(0~0.2")

Bring the piping side slightly lower.

(b)Unless the adjustment to the levelness is made properly, malfunctioning or failure of the float switch may occur.

5.Drain Piping

(a)Drain piping should always be in a downhill grade (1/50~1/100) and avoid riding across an elevation or making traps.

Good piping		Inproper piping
Suspension	1.5m ~ 2m		Avoid riding across an elevation
bolts	1.5m ~ 2m
		Air vent	Keep free from traps
			Do not pipe under water
Heat	A downhill grade
insulation	of 1/100 or more

(b)When connecting the drain pipe to unit, pay suffcient attention not to apply excess force to the piping on the unit side. Also, fix the piping at a point as close as possible to the unit.

(c)For drain pipe, use hard PVC general purpose pipe VP-25(I.D.1") which can be purchased locally. When connecting, insert a PVC pipe end securely into the drain socket before tightening securely using the attached drain hose and clamp. Adhesive must not be used connection of the drain socket and drain hose (accessory).

	Stage
Drain socket	difference Drain hose
Drain socket	part

Drain socket			VP 25 joint
	Pipe cover(large)		VP 25 joint
	Pipe cover(large)		(field purchased)
	[for insulation]
Main unit	(accessory)
Main unit
	Drain hose		VP 25
	Clamp (accessory)		(field purchased)
	(accessory)	Adhesion	Pipe cover
	Pipe cover(small)		[for insulation]
	Pipe cover(small)		(field purchased)
	[for insulation]		(field purchased)
	(accessory)

HDU-42HF03/H specifications

The Haier HDU-42HF03/H is a remarkable addition to the world of cooling and heating solutions, designed to meet diverse climate control needs in residential and commercial settings. This sleek and efficient ducted air conditioning unit combines advanced technology with reliability, ensuring optimal comfort for users throughout the year.

One of the standout features of the HDU-42HF03/H is its impressive energy efficiency. With a high Energy Efficiency Ratio (EER) and Coefficient of Performance (COP), it minimizes energy consumption while maximizing cooling and heating output. This sustainability-centric design not only reduces electricity bills but also supports environmentally friendly practices.

The unit employs inverter technology, which allows for variable speed control of the compressor. This means that the air conditioner can adjust its cooling or heating power based on the room's temperature, maintaining a consistent environment without the constant on-off cycling of traditional systems. This translates to quieter operation and longer equipment lifespan, as it reduces wear and tear on the components.

Equipped with advanced air filtration technology, the HDU-42HF03/H helps improve indoor air quality by trapping dust, pollen, and other allergens. This is particularly beneficial for individuals with respiratory conditions or sensitivities. The unit is designed for easy maintenance, with accessible filters that can be cleaned or replaced as needed, ensuring optimal performance over time.

The Haier HDU-42HF03/H is also notable for its climate adaptability. It can efficiently operate in various ambient conditions, making it suitable for different geographical locations. Its robust build quality ensures that it can withstand the rigors of daily use.

In terms of features, the HDU-42HF03/H offers a user-friendly control interface, enabling easy temperature adjustments and mode selection. Smart home compatibility allows users to integrate the system into existing smart devices, providing enhanced control and convenience.

Overall, the Haier HDU-42HF03/H stands out as a reliable and efficient choice for those seeking a versatile air conditioning solution. With its blend of energy efficiency, advanced technology, and user-centric design, it is well-equipped to provide comfortable living and working environments year-round. Whether for cooling hot summers or efficiently heating during chilly winters, this unit is a commendable option for modern climate control needs.