Operation method of fan controller | Haier HDU-42HF03/H instruction

Installation Manual For Indoor Unit

10. The operation method of fan controller

Through the fan controller switch in the electric box, the air volume of this unit can be continuously adjusted.

It is unnecessary to adjust air volume through the duct side wind level (unit outside static adjustment). The air volume set should be in the operation air volume range.

Figure I shows the position of fan controller in the electric box and operation method.

After finishing the electric work, perform test run. According to the main points in Figure II making the chosen switch No. accordant. And confirm if it reaches the needed air volume.

Note:

1)When operating the fan controller, it is possible to touch the electric charging part, so do cut off the power supply.

2)Do not set the dial at the position less than 1.

3)The figure circled in Figure II indicate the capacity number of fan controller. The non-listed capacity number may exceed the permitted operation capacity range, so it is impossible to operate.

4)When delivering from factory, the capacity number of fan controller is set at “No.5”.

Rotate this switch

(capacity number setting:

No. 1 ~ No. 8)

Once the fan controller has trouble, this linker can perform emergency assistant control. When this linker is connected to the linker from the PCB, it can operate with total load.

When this linker is
connected to the linker
from the PCB, through
the fan speed adjustment
panel to adjust speed.	Figure 1
	Figure 1

		High	Condition of standard air volume
		Low	(air volume 100Pa)
	200		*	*
				*
				*	*
		*			Example of
		*	*		Example of
Pa	150		*	*	duct
	150			*
				*
pressure				*
pressure		*
		*
	100	*
static	100
static		*
Outer		*
Outer	50
	50
	0	30	34 35	40	43
	26	30	34 35	40	43
	Lower limit			Upper limit
		Standard air volume(m3/min)			Figure 2

The example of the method of choosing capacity number:

1)If the unit is in high-speed operation, needing take outer static pressure is 180Pa in capacity air volume 34m3/min as working condition point, according to Figure II “The characteristic chart of air volume”, the capacity number of fan controller is No. 2.

2)If the unit is in low speed operation, needing take outer static pressure is 60Pa in capacity air volume 32m3/min as working condition point, according to Figure II “The characteristic chart of air volume”, the capacity number of fan controller is No. 4.

HDU-42HF03/H specifications

The Haier HDU-42HF03/H is a remarkable addition to the world of cooling and heating solutions, designed to meet diverse climate control needs in residential and commercial settings. This sleek and efficient ducted air conditioning unit combines advanced technology with reliability, ensuring optimal comfort for users throughout the year.

One of the standout features of the HDU-42HF03/H is its impressive energy efficiency. With a high Energy Efficiency Ratio (EER) and Coefficient of Performance (COP), it minimizes energy consumption while maximizing cooling and heating output. This sustainability-centric design not only reduces electricity bills but also supports environmentally friendly practices.

The unit employs inverter technology, which allows for variable speed control of the compressor. This means that the air conditioner can adjust its cooling or heating power based on the room's temperature, maintaining a consistent environment without the constant on-off cycling of traditional systems. This translates to quieter operation and longer equipment lifespan, as it reduces wear and tear on the components.

Equipped with advanced air filtration technology, the HDU-42HF03/H helps improve indoor air quality by trapping dust, pollen, and other allergens. This is particularly beneficial for individuals with respiratory conditions or sensitivities. The unit is designed for easy maintenance, with accessible filters that can be cleaned or replaced as needed, ensuring optimal performance over time.

The Haier HDU-42HF03/H is also notable for its climate adaptability. It can efficiently operate in various ambient conditions, making it suitable for different geographical locations. Its robust build quality ensures that it can withstand the rigors of daily use.

In terms of features, the HDU-42HF03/H offers a user-friendly control interface, enabling easy temperature adjustments and mode selection. Smart home compatibility allows users to integrate the system into existing smart devices, providing enhanced control and convenience.

Overall, the Haier HDU-42HF03/H stands out as a reliable and efficient choice for those seeking a versatile air conditioning solution. With its blend of energy efficiency, advanced technology, and user-centric design, it is well-equipped to provide comfortable living and working environments year-round. Whether for cooling hot summers or efficiently heating during chilly winters, this unit is a commendable option for modern climate control needs.