Venturer PVS1262 important safety instructions Remote Control Power Supply, Sound System

Page 1

IMPORTANT SAFETY

REMOTE CONTROL

POWER SUPPLY

B. Using Headphones / Earphones

• Turn down the volume before connection, and then adjust the level.

INSTRUCTIONS

1 . Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2 . Retain Instructions - The safety and operating instructions should be retained for future reference.

3 . Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4 . Follow Instructions - All operating and use instructions should be followed.

5 . Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.

6 . Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved with care. Quick

Using the Remote Control

Point the remote control at the REMOTE SENSOR located on the unit.

When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation.

The recommended effective distance for remote operation is about 16 feet (5 meters).

Remove the PVC sheet before operating the Remote Control.

TO CHANGE REMOTE BATTERY

1 . Open the battery door.

2 . Insert one CR2025 (3V) size battery.

BATTERY REPLACEMENT

When the battery becomes weak, the operating distance of the remote control will be greatly reduced and you will need to replace the battery.

A. Using the AC adapter

This AC adapter operates on AC 100V -120V.

Cautions:

The included AC adapter is for use with this unit only. Do not use them with other equipment.

When the unit is not going to be used for long time, disconnect the AC adapter from the AC outlet.

When the AC adapter is plugged in, the apparatus is not completely disconnected from the main, even when the power is turned off.

B. Using a car plug adapter

1

To AC

2 outlet

To "DC IN

 

9V" jack

 

 

AC Adapter

• When headphones / earphones are connected, no sound will be output from the unit's speaker.

 

Headphones /

Caution: Avoid listening to sound at levels

Earphones

(3.5mm diameter plug)

which may be harmful to your ears.

 

 

 

SOUND SYSTEM

Dolby Digital

Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can reproduce from one to 5.1 discrete channels of excellent quality audio.

The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-channel listening. An additional Dolby Digital

stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

7 . Wall or Ceiling Mounting - The appliance should be mounted to a wall

or ceiling only as recommended by the manufacturer. 8 . Ventilation - The appliance should be situated so that its location or

position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a book case or cabinet, that may impede the flow of air through the ventilation openings.

9 . Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

Note:

If the remote control is not to be used for a long time, remove the battery to avoid damage caused by the corrosive effects of battery leakage.

WARNING: Do not dispose of battery in fire, battery may explode or leak.

CONTROL REFERENCE GUIDE

A 12V car plug adapter allows the unit to be used with vehicles that have a 12V, negative ground electrical system.

To Car plug

2 To the cigarette

WARNING:

112V jack

Disconnect the car plug

 

lighter socket

adapter when not in use.

 

 

Not for use in 24V

Car plug adapter

 

vehicles.

 

 

decoder is required for reproduction of the discrete multi-channel soundtracks available on many DVDs.

Manufactured under license from Dolby Laboratories.

'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.

PLAYING A DISC Basic playback

DVD CD

 

 

10.Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11.Grounding or Polarization - Precautions should be taken so that the grounding or polarization means of an appliance are not defeated.

12.Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

14.Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

15.Object and Liquid Entry - Care should be taken so that objects do not fall, and liquids are not spilled, into the enclosure through openings.

16.Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled, into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally or exhibits a marked change in performance; or

E.The appliance has been dropped, or the enclosure damaged.

17.Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

Remote Control

 

TV MODE

 

 

MENU

 

1

 

 

 

 

15

2

STOP

PLAY

PAUSE

GOTO

 

 

 

 

 

14

3

PREV

SEARCH

NEXT

 

4

 

 

 

 

13

MEMORY

 

ANGLE

DISPLAY

12

5

 

M

 

 

 

11

 

 

 

 

AUDIO

6

 

 

 

10

 

ENTER

 

 

 

 

 

2

3

 

 

 

 

 

SUBTITLE/

 

7

 

 

 

RETURN

9

4

5

6

 

 

7

8

9

0

 

 

 

 

SETUP

 

 

8

A-B DISC

REPEAT

1) TV MODE button

In stop mode, select whether to output

the video signal in PAL or NTSC. When

the TV shows “AUTO” this means the

output signal depends on the DVD If the

selected chapter or track.

6)

Cursor ( , , , ) buttons

 

Use to highlight selections on a menu

 

screen and adjust certain settings.

 

ENTER button

 

Confirm selections on a menu screen.

7)

Number (0 - 9) buttons

 

Use when creating programmes, and

 

entering a parental level password. Also

 

use to select a CD track directly.

8)

SETUP button

 

In stop mode, open and close the

 

SETUP menu.

 

REPEAT A-B button

 

Perform point-to-point repeat playback

 

on a DVD or CD.

 

REPEAT DISC button

 

Repeat chapter or title of a DVD.

 

Repeat single track or whole CD.

9)

SUBTITLE button

 

Select one of the subtitle languages

 

programmed on a DVD.

 

RETURN button

 

Return to the normal operation after

 

using the SETUP menu of a DVD.

Cautions:

When purchasing a car plug adapter, seek expert advice to ensure that it is fully compatible with the unit.

In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.

Make sure the unit is fastened securely to prevent it from falling or flying through the air in the event of an accident.

When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.

After use, disconnect the 12V car plug adapter from both the unit and cigarette lighter socket.

C.Using the rechargeable battery

Charge the rechargeable battery before using them for the first time. The normal charging time should be completed at least 4-5 hours. The green charging light will go out when the battery becomes fully charged.

The rechargeable battery is suitable when adapting the unit for portable use and when it is convenient for you to enjoy the unique functions of the unit out of doors.

To recharge the battery

1Place battery on the bottom of the DVD player

This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced in a manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in question for more information about the options available on that DVD.

” may appear on the screen during operation. A “ ” means that the desired operation is not permitted by the unit or disc.

Playing a Disc

1 . Slide the POWER ON/OFF switch on the front of the unit to the ON position.

See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2. 2 . Open the disc door.

3 . Hold the disc by its sides and carefully place it onto the spindle with the label side facing up, pushing gently until you hear a “click”.

4. Close the disc door.

It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring you to the main menu of the DVD, or start playing the DVD.

5.If the unit does not automatically start playing the DVD, press the PLAY button.

Pausing playback (still mode)

Press the II PAUSE button. To resume normal playback, press the PLAY button. Each time you press the II PAUSE button, the picture advances one frame.

Stopping playback

DISC FORMATS

The unit can playback.

DVDs

 

Audio CDs

Compatible

 

[8cm/12cm disc]

 

[8cm/12cm disc]

 

Region Management Information

Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs. If the Region number printed on the DVD does not correspond to the Region number of this unit,it cannot play that disc.

The region number of this unit is 1. 1

Disc Function or Operation that is Not Available

When the symbol appears on the screen, it indicates that the function or operation

 

TV shows “PAL” or “NTSC” it means the

 

output signal is fixed to either “PAL” or

 

“NTSC”. For best results, keep this set

2)

on “AUTO” or “NTSC”.

 

STOP button

 

 

Stop playing a disc.

 

 

PLAY button

 

Press to start or resume playback a disc.

 

 

PAUSE button

3)

Pause

playback, frame advance.

 

PREV button

 

Move back through titles, chapters or

4)

tracks

on a disc.

/

SEARCH buttons

 

 

SEARCH: Fast reverse playback.

 

 

SEARCH: Fast forward playback.

5)

MEMORY button

 

In stop mode, enter the number of a

10)

AUDIO button

 

Select one of the audio sound tracks

 

programmed on a DVD or select the

 

audio output mode on an AUDIO CD.

11)

ANGLE button

 

Switches between multiple camera

 

angles when the DVD you are playing

 

has multiple camera angles recorded.

12)

DISPLAY button

 

Change disc status information displayed

13)

on the screen.

 

NEXT button

 

Move forward through titles, chapters or

 

tracks on a disc.

14)

GOTO button

 

Skip directly to a location on a DVD.

15)

MENU button

2To the slots

To AC

4

To DC IN

5outlet

9V jack

3ToIN jackBATTERY

Charging

 

7light ON

 

Turn power to OFF

 

6position this will

 

start recharging

 

the battery

Recharging is

 

8 completed when

 

charging light

 

goes out

Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button.

If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will reset the disc to the beginning.

Skipping to a different track

Press the PREV button repeatedly to skip to the start of the current or previous track.

Press the NEXT button to skip to the next track.

For audio CDs, use the number buttons on the remote control to jump immediately to the desired track number.

Fast Forward/Fast Reverse

1 . Press the SEARCH or SEARCH button when a disc is playing.

The disc begins a fast scan at two times normal (x2) speed.

Four speeds are available. Each time the SEARCH button is pressed, the speed of the fast scan changes in the following sequence:

attempted is not available at that time. This occurs because the DVD manufacturer determines the specific functions of DVDs. Certain functions may not be available on some DVDs. Be sure to read the documentation provided with the DVD.

Icons Used on DVDs

Unit

Open and close DVD menu.

Warnings:

It could only be recharged when

the unit is OFF and using the AC adapter.

The rechargeable battery cannot

be recharged when the unit is ON.

X 2 X 4 X 8 X 20

Note:

You also can press and hold / (PREV/NEXT) buttons repeatedly to select different fast scan speeds.

Sample lcons

2

1. English

Language

selections

for

audio

2. French

2

1. English

Language

selections

for

subtitles

 

2. French

LB

 

Screen

aspect

ratio

 

 

2

 

Multiple

camera

angles

 

 

 

Region

code indicator

 

Note:

When playing back a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played, but the graphic images will not be shown.

Title, Chapter and Tracks

• DVDs are divided into “titles” and “chapters”. If

16

1

15

 

 

14

 

13

 

12

2

11

 

3

 

4

 

5

10

6

9

7

8

Cautions:

The included AC adapter is for use with this unit only. Do not use them with other equipment.

When the unit is not going to be used for long time, disconnect the AC adapter from the AC

 

outlet.

When the AC adapter is plugged in, the apparatus is not completely disconnected from the

 

main, even when the power is turned off.

Condition and attention:

When rechargeable battery power is low, the unit will stop playing.

Do not short-circuit the terminals.

Recharge the battery when you are ready to use it again.

While using the rechargeable battery, the environmental temperature should be 5°C (41°F) to 35°C (95°F).

To get the longest service life of the rechargeable battery, charge at indoor-temperature.

Never dispose the rechargeable battery in fire or water. Never heat up the rechargeable battery.

Do not open the rechargeable battery, refer servicing only to qualified service personnel.

2 . Press the PLAY button when you reach the desired point to resume playback at normal speed.

SKIP (Forward / Reverse)

While you are playing a disc, press the NEXT button to move to the beginning of the next

chapter or track. Press the PREV button to move to the previous chapter or track and automatically start playing it.

Audio selection DVD

On some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of playback.

1 . While a disc is playing, press the AUDIO button to

 

 

show the current audio format number.

: [1ENG

5.1CH]

2 . Press the AUDIO button repeatedly to select the desired

 

 

the disc has more than one movie on it, each movie

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

would be a separate “title”. “Chapters” are sections

 

Chapter 1

Chapter 2

Chapter 3

Chapter 1

Chapter 2

of titles.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Audio CDs are divided into “tracks”. A “track” is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

usually one song on an Audio CD.

 

 

 

 

 

 

 

 

 

 

 

 

Track 1

Track 2

Track 3

Track 4

Track 5

Note :

Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on them, but some do not.

1)

TFT cover

2)

Rechargeable battery

3)

DC IN 9V / Car Plug 12V jack

4)

AUDIO OUT L / R jacks

 

VOL MAX

 

Adjust the VOLUME to MAX when

 

connecting the unit to another device.

 

VIDEO OUT jack

5)

Headphone jack

6)

VOLUME + / - controls

STOP button

Stop playing a disc.

9) PLAY button

Press to start or resume playback a disc.

10) Disc Door

11) POWER ON / OFF switch

12) POWER ON indicator

When the POWER ON / OFF switch is in

the ON position, the light will illuminate.

13) CHARGING indicator

Turning on the unit

1 . Slide the POWER ON/OFF switch on the front of the unit to the "ON" position.

2 . The DVD logo (start-up picture) will appear on the screen.

CONNECTIONS

audio format.

Notes :

If only one audio format is recorded, the number does not change.

About two seconds later, playback continues in the new audio format.

Subtitle selection

DVD

1 . While a DVD is playing, press the SUBTITLE / RETURN button to

display the current language setting, as shown in the example below.

Notes on Unauthorized Discs

You may not be able to play some DVDs on this unit, particularly if they were purchased from outside your geographic area or made for business purposes.

ACCESSORIES

Please check and identify the supplied accessories.

To order accessories contact web site (http://www.venturersupport.com/pvs1262)

Remote with battery

x 1

AC adapter

x

1

Rechargeable battery

x

1

7)

Adjust

 

the volume.

 

 

PREV button

 

 

Press

 

 

PREV button to go back to

 

 

 

previous chapters /tracks. Press and

 

hold

 

PREV button to begin fast scan.

 

 

 

 

 

NEXT button

 

 

 

 

Press

 

 

NEXT button to advance

 

 

 

 

 

 

 

chapters / tracks. Press and hold

8)

NEXT button to begin fast scan.

 

 

PAUSE button

Press to pause playback of disc. Each time you press the PAUSE button the picture advances one frame. Press the

PLAY button to resume playback.

Charge the rechargeable battery before

using them for the first time. The normal

charging time should be completed at

least 4-5 hours. The green charging light

will go out when the battery becomes fully

charged.

14) Remote sensor

Receives the remote control unit signals.

15) BRIGHTNESS button

Adjust the relative lightness or darkness

of the colour.

16) Screen switch

WIDE : Wide screen

NORMAL : Normal screen

A. Connecting a TV

If your TV has audio/video inputs, you can also connect the unit to your audio/video cable.

• You must adjust the VOLUME to MAXIMUM when you connect this unit to other equipment.

• Put down the TFT cover when the playback mode is chosen.

 

 

ToVIDEO/AUDIO

Watching a DVD on your TV

OUT jacks

 

1

. Turn on the unit.

 

2

. Turn on the TV and set it to DVD

 

 

mode.

AUDIO /VIDEO cable (not supplied)

TV using an

TV

R

AUDIO

IN

L

VIDEO

IN

: [2ESP]

2 . Press the SUBTITLE / RETURN button repeatedly to select the desired

subtitle language.

Notes :

If only one language is recorded, the language does not change.

About two seconds later, playback continues with the new subtitle you selected.

The number of languages recorded differs depending on the disc.

If no button is pressed within a few seconds, playback continues without changing the current subtitle.

This function can only be used for discs on which subtitles have been recorded in multiple languages.

On some DVDs, subtitles are activated from the main menu of the DVD. Press the MENU button to activate the main menu.

E - 2

E - 3

E - 4

E - 5

Image 1
Contents Accessories Remote Control Power SupplySound System Control Reference GuideTrouble Shooting Guide Safety PrecautionsCustomizing the Function Settings Maintenance