Klipsch 2.1 manual N T R O L P O D F E At U R E S, E C I F I C At I O N S, Troubleshooting

Page 3

C O N T R O L P O D F E AT U R E S

Headphones: The 1/8" stereo headphone output jack, located on the right-hand side of the control pod, turns off the two satellite speakers and the subwoofer output. The main volume control will adjust the head- phone output.

MP3/Aux: The MP3/Auxiliary input jack is used with portable audio players. This signal will be mixed with the main source. The input has a +6dB input sensitivity to help compensate for the lower output voltage of some portable players. To obtain the proper balance with the main signal, the level adjustments in the com- puter software and in the portable player will need to be adjusted. An example would be listening to an MP3 player while surfing the net and hearing associated sounds from various websites. The mixed sound may not be desirable, and you will ultimately determine how you use this feature.

NOTE: During playback of MP3 files, overall sound quality may be perceptibly degraded compared to other audio sources such as CD. This is caused by the encoding method and quality of the MP3 file. It is recom- mended that MP3 files be encoded at a minimum 128 bit rate.

S P E C I F I C AT I O N S

Total System Frequency Range:

32Hz-20kHZ

Maximum Acoustic Output:

106dB Peak

Amplifier Headroom:

2 X 35 watts-satellites

 

1 X 130 watts-subwoofer

Satellite Impedance:

4 ohms minimum

Preamplifier Control Pod:

Subwoofer and Main volume level controls

 

LED power indicator

 

MP3/Aux player line input with soundcard mixing function

 

Headphone jack

 

Direct path interface

Satellite:

Sealed elliptical two-way enclosure with 0.75" polymer dome

 

tweeter mated to MicroTractrix(r) Horn and 3" long-throw

 

mid-bass driver

Subwoofer:

Bass-reflex enclosure with front port and side-firing 6.5"

 

long-throw driver; flared tuned port; sixth-order enclosure design

Amplifier:

Digital linear hybrid amplifier; discrete MOSFET output

 

power section

Subwoofer Limiter:

Protective limiter function protects the driver and amplifier

 

from extremely high volume playback

A C C E S S O R I E S

 

All accessories are available at www.klipsch.com.

RB-1 Speaker Stands

Telescopic floor stand for ProMedia satellites. Cast metal base, hollow tubing (allowing wire to be hidden inside). Minimum height: 28 inches. Maximum height: 48 inches.

WB-1 Wall Mount Brackets

Versatile Wall Bracket 1 is made from the same quality steel as the ProMedia satellite pedestals. The clean, simple design affords the most extreme angle adjustment, with up to 160 degrees of movement for precise speaker positioning in the horizontal plane. Wall stud wood screws included.

T R O U B L E S H O O T I N G

If no sound, ensure that:

-Power, input, speaker cables and connectors are securely attached

-Software is properly installed and functioning

-Computer sound (control panel) volume is turned up and not muted

-LED glowing

If one or more speakers have little or no sound, ensure that:

-All cables are connected properly

-Connectors are fully "seated" in soundcard and speakers

-Main and subwoofer level controls are properly adjusted on control pod

-Computer software audio settings are adjusted for proper use

-Computer system's sound (control panel) volume is turned up

If the satellites or subwoofer exhibit distortion or buzzing:

-Turn down computer's overall volume (via control panel), and reduce control pod volume

-Turn down subwoofer volume, as program signal may be too strong

-Plug the subwoofer power cord into a surge protector

If there is noise or hissing and the volume is low even with main volume turned up:

-Turn up computer's sound volume (via control panel)

-Turn down main volume on control pod to compensate

-Ensure that software/ hardware is properly installed and operating

If there is computer monitor interference:

-Make sure the subwoofer is positioned at least 10" from the computer monitor

-Increase the distance between the satellite speakers and the computer monitor

For more detailed information and FAQs, please visit www.klipsch.com.

WA R R A N T Y— U . S . a n d C a n a d a O n l y

KLIPSCH, LLC ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (sub- ject to the terms set forth below) for a period of one (1) year from the date of purchase. During the warranty period, KLIPSCH will repair or replace (at KLIPSCH's option) this product or any defective parts. Proof of pur- chase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the war- ranty period, must be presented or included to obtain warranty service. This warranty does not cover damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modification of, or to any part of this product. This warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than KLIPSCH or someone authorized by KLIPSCH to do warranty work. Any unauthorized repairs will void this warranty. This warranty does not cover product sold AS IS or WITH ALL FAULTS. This warranty is invalid if the factory applied serial number or date stamp has been altered or removed from this product.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.

Some states do not allow the exclusion or limitation of incidental or consequential damages or implied war- ranties so the above exclusions may not apply to every customer. This warranty gives you specific legal rights, and you may have other rights which vary from State to State.

To obtain warranty service, please follow these directions:

1.If you purchased this product from a retail store, please return this product to such store in its original packaging along with proof of purchase.

2.If you purchased this product from a computer manufacturer, please contact that manufacturer.

3.For purchases made through www.klipsch.com, please call KLIPSCH Customer Service at 1-888-554-5665. Product may only be returned to KLIPSCH after a Return Authorization number has been obtained

from KLIPSCH.

Returned product must be shipped, freight prepaid to KLIPSCH in either its original packaging or packaging affording an equal degree of protection along with proof of purchase.

WA R R A N T Y— O u t s i d e t h e U . S . a n d C a n a d a

The warranty on this product if it is sold to a consumer outside of the United States or Canada shall comply with applicable law and shall be the sole responsibility of the distributor that supplied this product. To obtain any applicable warranty service, please contact the dealer from which you purchased this product, or the dis- tributor that supplied this product.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Promedia U N D C a R D C O N N E C T I O N G L I S HC K I N G L I S T E a K E R P L a C E M E N TTroubleshooting N T R O L P O D F E AT U R E SE C I F I C AT I O N S H ÉM a D E B R a N C H M E N T D E S E N C E I N T E S Programmes de commande de volumeS T E D E S a R T I C L E S S E E N P L a C E D E S E N C E I N T E SSupports de montage mural WB-1 C E S S O I R E SPA N N a G E Pieds d’enceinte RB-1U T S P R E C H E R a U F S T E L L U N G U T S C HU N D K a R T E N a N S C H L U S S H a L TG L E R E I N H E I T S F U N K T I O N E N C H N I S C H E D AT E NB E H Ö R Ö R U N G S B E S E I T I G U N GN T E N U T O D E L L a C O N F E Z I O N E TA L I a N OConnessione Della Scheda Audio Connessione Degli AltoparlantiN Z I O N I D E L L a C O N S O L E D I C O M a N D O E C I F I C H ES O L U Z I O N E D E I P R O B L E M C E S S O RN E X I Ó N D E L O S a Ltav O C E S PA~N O LN T E N I D O D E L PA Q U E T E L O C a C I Ó N D E L a Ltav O ZP E C I F I C a C I O N E S C E S O R I O SL U C I Ó N D E P R O B L E M a S I N E S E Page A L P R O M E D I a 2 .1 S E T U P I N S T R U C T I O N S Do not plug in the AC power until setting up your systemOther Cut along dotted line and mailPlease tell us about you Retail Dealer Direct MailKlipsch, L.L.C
Related manuals
Manual 8 pages 12.33 Kb

2.1 specifications

Klipsch has long been synonymous with high-quality audio, and the Klipsch 2.1 speaker system exemplifies the brand’s dedication to superior sound performance and innovative technology. This system combines two satellite speakers with a dedicated subwoofer to deliver an immersive audio experience that is ideal for both music lovers and movie enthusiasts.

One of the standout features of the Klipsch 2.1 system is its robust, high-performance subwoofer. Equipped with a powerful driver, it produces deep, thunderous bass that can be felt as much as it is heard. This capability adds an extra layer of excitement to movies, music, and gaming, making the audio experience more dynamic and engaging. The subwoofer’s design is also optimized to minimize distortion, ensuring that even the most demanding bass tones are rendered cleanly and accurately.

The satellite speakers are designed with Klipsch’s exclusive Tractrix horn technology. This innovative approach enhances the speaker's high-frequency performance, providing a wide dispersion of sound that envelops the listener. The result is a clear, detailed, and natural soundstage that helps to accurately reproduce vocals and instrumentals, creating a lifelike listening experience.

A notable aspect of the Klipsch 2.1 system is its stylish, contemporary design. The speakers feature a sleek, modern appearance with a combination of wood finishes and metal accents, making them a visually appealing addition to any room. This aesthetic appeal does not compromise the build quality, as the speakers are constructed with durable materials that ensure longevity and reliability.

Connectivity is another strong suit of the Klipsch 2.1. The system typically includes a range of input options, allowing users to easily connect their favorite devices, whether it be a television, computer, or smartphone. Some models may even feature Bluetooth connectivity, providing the convenience of wireless streaming from compatible devices.

Klipsch also emphasizes user-friendly operation. The system may include a remote control for convenient adjustments from anywhere in the room. This feature enhances the overall experience, allowing users to switch tracks, adjust volume, and modify settings without having to reach for the speakers directly.

In summary, the Klipsch 2.1 speaker system represents a harmonious blend of cutting-edge technology, striking design, and superior audio quality. With its powerful subwoofer, innovative horn technology, versatile connectivity options, and user-friendly features, it is an exceptional choice for anyone seeking to elevate their audio experience at home. Whether for casual listening, movie nights, or gaming marathons, the Klipsch 2.1 system delivers immersive sound that captivates and excites.
Top Page Image Contents