Adjust the display brightness

O:iPod dock. (Main unit only feature) Insert the appropriate adapter for your particular iPod, and insert the iPod. Adapters for older iPods are included with the KC-80. Newer iPods include adapters; so if an adapter was packed with your iPod, then use that adapter. Insert the flat cover (supplied) if the iPod dock will not be used.

P:CLOCK button (Main unit only feature). Used to set the clock time. Button is located on back center of main unit.

Setting the clock (You must progress through the following process with less than 10 second between steps to avoid dropping out of time set mode.)

1.Hold the CLOCK ADJ button (P) down until the time display begins flashing. Note: If this function is accidentally activated, do nothing and normal operation will resume after 10 seconds.

2.Use the SKIP buttons (I) to select 12 or 24-hour time format.

3.Within 10 seconds, press CLOCK ADJ (P) again to advance to time setting.

4.Press the SKIP button (I) to set the hour, and the SKIP button to set the minute. Note: In 12-hour mode, “PM” showing in the display window indicates an afternoon time. There is no “AM” indicator.

5.Within 10 seconds, press the CLOCK ADJ (P) to move to the year setting.

6.Press the SKIP buttons (I) to set the year.

7.Within 10 seconds, press the CLOCK ADJ (P) again to advance to the month and day setting.

8.Use the SKIP buttons (I) to set the month and day. Note: These buttons can be held down to rapidly advance, or pressed repeatedly for precise control. During month and day setting, these buttons move forward and back in days only. To set the month to December, you must go through 334 days.

9.Within 10 seconds, press the CLOCK ADJ (P) button one last time to finalize the setting. The seconds will start from 00 at this point.

1.Press the SNOOZE/DIMMER button (M) to cycle through the display brightness choices. The choices are off, dim, medium, and bright.