9.Press and hold either of the SKIP 
buttons (I) to quickly move to a point in a recording that you want to begin listening from. Release the button when the desired point is located.
Using the AUX input
1.Any device that has a standard headphone jack can be played through the KC-80. Use the supplied 3.5 mm to 3.5 mm stereo interconnect cable to connect the device’s headphone jack to the AUX input on the back of the KC-80. Activate the AUX input by pressing the AUX button (K) on the control panel of the KC-80.
2.Volume can be controlled from the external device or from the KC-80. Normally, the volume of the external device should be set to approximately half way and the listening volume controlled from the KC- 80. If you notice distortion at low volume, turn down the volume on the external device.
3.Laptop computers, Portable DVD, CD, MP3, Tape players, and hand-held TVs are ideal devices to connect to the AUX input.
Using the AUX OUT
1.The AUX out (located on the back of the KC-80) can be used to feed audio to an external device such as a tape recorder, computer, or wired/wireless music distribution system.
User notes:
