IBM Port Replicator II, Mini Dock instruction

(1)The modem connector is for connecting the ThinkPad Port Replicator II to a telephone line.

Note: If your ThinkPad computer does not support the modem connector, you cannot use the connector.

(2)The Ethernet connector is for connecting the ThinkPad Port Replicator II to a 10BASE-T/100BASE-TX/1000BASE-T Ethernet LAN. The indicator on the connector is the same as that on the ThinkPad computer.

Notes:

vIf your ThinkPad computer does not support the Ethernet connector, you cannot use the connector.

vYou cannot use the Token Ring cable for this connector.

vThis connector supports 10BASE-T/100BASE-TX/1000BASE-T Ethernet only.

vIf your ThinkPad computer does not support 1000BASE-T, this connector does not support 1000BASE-T.

(3)The external monitor connector is for connecting an external monitor.

(4)The digital visual interface (DVI) connector is for connecting a monitor that supports DVI.

Notes:

vThe DVI connector provides a digital interface only.

vIf your ThinkPad computer does not support DVI, you cannot use this connector.

(5)The Universal Serial Bus (USB) connector is for connecting a USB 1.1 or USB 2.0 device.

Note: If your ThinkPad computer does not support USB 2.0, the attached USB device does not work in USB 2.0 high-speed mode.

(6)The line-out jack, a jack 1/8 inch (3.5 mm) in diameter, is for connecting an external stereo audio device.

(7)The line-in jack, a jack 1/8 inch (3.5 mm) in diameter, is for connecting an external stereo audio device.

(8)The power jack is for connecting the ac adapter.

(9)The mouse connector is for connecting a mouse.

About the ThinkPad Port Replicator, the Port Replicator II, and the Mini Dock