IBM Mini Dock, Port Replicator II manual External-diskette-drive

vThis connector supports 10BASE-T/100BASE-TX/1000BASE-T Ethernet only.

vIf your ThinkPad computer does not support 1000BASE-T, this connector does not support 1000BASE-T.

(3)The external monitor connector is for connecting an external monitor.

(4)The digital visual interface (DVI) connector is for connecting a monitor that supports DVI.

Notes:

vThe DVI connector provides a digital interface only.

vIf your ThinkPad computer does not support DVI, you cannot use this connector.

(5)(6) The Universal Serial Bus (USB) connectors are for connecting USB 1.1 or 2.0 devices.

Notes:

vIf your ThinkPad computer does not support USB 2.0, any attached USB device does not work in USB 2.0 high-speed mode.

vIf your operating system is Windows® XP and your computer returns to normal operation after being attached to a ThinkPad Mini Dock while it is operating or in standby mode, the warning message, ″HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub,″ may appear. It is displayed because of the USB 2.0 driver problem on Windows XP. You can safely close it. If your computer belongs to ThinkPad R40 Series, X30 Series, or T40 Series and is compatible with USB 2.0, the message is not displayed.

(7)The line-out jack, a jack 1/8 inch (3.5 mm) in diameter, is for connecting an external stereo audio device.

(8)The line-in jack, a jack 1/8 inch (3.5 mm) in diameter, is for connecting an external stereo audio device.

(9)The power jack is for connecting the ac adapter.

(10)The mouse connector is for connecting a mouse.

(11)The keyboard connector is for connecting an external keyboard or an external numeric keypad.

(12)The external-diskette-drive connector is for connecting an

external-diskette-drive.

About the ThinkPad Port Replicator, the Port Replicator II, and the Mini Dock 7