Operation

Playing a CD

1.Press the STANDBY button to turn the unit on.

2.Press the FUNCTION button and switch the unit to CD mode.

3.Press the OPEN/CLOSE button to open the CD door, insert a CD or CD-R/RW disc into the CD Drive and press the OPEN/CLOSE button to close the CD door.

4.Press the PLAY/PAUSE button to play or pause the loaded CD.

5.Press the FWD/PEV buttons to skip tracks, press and hold the FWD/PEV buttons to search through individual tracks.

6.Press the REPEAT button consecutively to repeat a single track or entire CD.

7.Press the SHUFFLE button to play songs from a CD in a random order.

8.Press the OPEN/CLOSE Button to eject the loaded CD from the unit.

Programming a CD (Up to 20 tracks can be programmed)

1.After insert a CD, press the STOP button to stop CD playing.

2.Press the MEM button to activate the program function.

3.Press the FWD/PEV buttons to select a CD track, and press the MEM button to confirm the selection.

4.Repeat step 3 until the desired tracks are programmed.

5.After the program setting, press the PLAY/PAUSE button to play or pause the programmed CD tracks.

Tuning the AM/FM Radio

1.Press the STANDBY button the unit on.

2.Press the FUNCTION button to switch to unit to radio mode.

3.Press the STOP/BAND button to switch between AM and FM radio.

4.Press the FWD/PEV buttons to tune the radio.

5.Press and hold FWD/PEV buttons to autoscan the radio station

Extend and adjust the telescopic FM antenna to improve FM reception.An AM antenna is built-in to the unit. Adjust the position of the unit to improve AM reception.