APC AP9626, AP9628, AP9627 user manual Introduction, Unpacking, Environmental Specifications

Introduction

Introduction

The APC® step-down transformers are used to convert a higher input voltage (208-200 V) to a lower output voltage (120-100 V) which might be more fitting for certain environments or system configurations.

Note: Illustrations in this document may vary from your actual configuration.

Unpacking

Read the Safety Guide before installation.

Note: The model and serial numbers are located on a small, rear panel label. For some models, an additional label is located behind the front bezel.

Inspect the transformer upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly.

Check the package contents:

•Transformer

•Three front bezel kits

•Rail kit

•Literature kit containing:

•Product documentation

•User Manuals CD

•Safety information

•Warranty information

Environmental Specifications

This unit is designed for indoor use only. Do not operate the unit where there is excessive dust.

Temperature	32° to 104° F (0° to 40° C)
Humidity	0 to 95% relative humidity, non-condensing

95lb

(43 kg)

The unit is heavy. Select a location sturdy enough to handle the weight.

APC Step-Down Transformer User Manual 3