Sylvania SIP220 instruction manual Connecting Other Digital Audio Devices, How to Using Radio

Operations

Connecting Other Digital Audio Devices

a.Use a line-in cord to connect an iPod shuffle or other audio device to the AUX-IN port.

b.Press the FUNCTION button to activate the AUX-IN.

c.The iPod shuffle or other audio device will now play through the speakers of the unit.

How to Using Radio

a. Power on the unit, press the FUNCTION button to radio mode.

b.Using the BAND button to switch between AM / FM Band.

c.Automatic Tuning - Press and hold the SEARCH/TUNE up or down buttons until the display begins to move, then release the buttons. The tuner will scan up or down the band until it finds the first strong station, and then stop on that station. Repeat this process until the tuner stops on your desired station.

d.Manual Tuning - Press and release the SEARCH/TUNE up or down buttons repeatedly until the display is showing the frequency of your desired station. Use the manual tuning method to tune to weaker stations that are bypassed during Automatic Tuning.

Antennas AM - If reception is weak, turn the unit to improve reception. FM - If reception is weak, adjust FM Wire Antenna length and the angle to improve reception.

Programming radio station presets

You can program as many as 10 FM and 10 AM radio station presets.

a.During RADIO mode, press BAND button to select AM/FM band.

b.Press the SEARCH/TUNE up or down buttons to desire station you want store.

c.Press and hold the MEM/CLK SET button to activate the programming mode.

d.Press the SEARCH/TUNE up or down buttons to select the preset number you want to store.

e.Press and hold the MEM/CLK SET button to store the station.

f.Repeat Steps “b” through “e” to program additional presets.

To recall the radio station preset

Press the M-DN(REAPEAT) or M-UP (PLAY/PAUSE/P+) Button repeatedly until the preset number you want appears on the display and the preset station will be sound.

9