Connection to a TV
If your TV has AUDIO/VIDEO input jacks, see the following instructions.
Basic Audio
TV |
|
|
| R | L |
|
|
|
|
| AUDIO IN |
(INPUT) |
|
|
|
| IN |
|
|
|
|
| |
|
| Audio cable |
| ||
|
|
| (supplied) |
| |
DVD/CD |
|
| OUT | ||
Player |
|
|
| ||
(OUTPUT) |
|
| |||
|
|
|
| R | L |
AUDIO VIDEO OUT OUT | R | L | Y | AUDIO OUT |
|
Setup | C /P BUS 1 | C /P | COMPONENT BUS 2 | (Analog) | |
|
|
| VIDEO OUT |
|
|
AUDIO OUT
Method 1 |
|
Good picture |
|
VIDEO IN |
|
IN |
|
Video | or |
cable |
|
(supplied) |
|
OUT |
|
VIDEO
OUT
VIDEO OUT
Method 2
Best picture
| COMPONENT | IN |
| VIDEO IN | |
Y | Y |
PBCB
or
PRCR
Component Video cables (commercially available)
|
| Y |
|
CB/PB | CR/PR | COMPONENT VIDEOOUT | OUT |
|
|
|
COMPONENT VIDEO OUT
Hint
•Connect this player directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
•When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT jack.
If your TV is compatible with 525p (480p) progressive scanning and you want to
enjoy that high quality picture;
You must select the connection Method 2 above and progressive scanning mode. To set the mode, press and hold [PLAY B] on the front panel of the player for more than 5 seconds, so that PROGRESSIVE indicator will light up.
If your TV is not compatible with progressive scanning;
Use this player in interlace mode. Make sure that PROGRESSIVE indicator is off. If not, press and hold [PLAY B] on the front panel of the player for more than 5 seconds, so that PROGRESSIVE indicator will light off.
[DVD/CD Player]
C STOP
B PLAY
EJECT
PROGRESSIVE
more than 5 seconds [Interlace mode]
[Progressive scanning mode]
After you have completed connections
•Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually near channel 0) for viewing the picture from this player. If the picture does not appear, also refer to the manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS (Example)
• Listed below are inputs for common brand name TV’s.
Admiral: | AUX |
Curtis Mathis: | LINE1, LINE2, 00, 90, 91, 92, 93 |
GE: | INPUT, TV/VCR, 00, 90, 91, 92, 93 |
Hitachi: | INPUT, AUX |
JVC: | VIDEO, VIDEO1, VIDEO2, VIDEO3 |
Kenwood: | AUX |
00 | |
Magnavox: | AUX CHANNEL |
Panasonic: | TV/VIDEO |
RCA: | INPUT, TV/VCR, 00, 90, 91, 92, 93 |
Samsung: | TV/VIDEO |
Sanyo: | VIDEO |
Sharp: | 00 |
Sony: | VIDEO1, VIDEO2, VIDEO3 |
Toshiba: | TV/GAME |
Zenith: | 00 |
– 10 – | EN |