Quick Use Guide
1 Connections
If your TV has AUDIO/VIDEO input jacks, see the section “Connection to a TV” on page 10 of the Owner’s Manual. If not, see the section “RF Modulator Connection” on page 11 of the Owner’s Manual.
2 Speaker Setup
Connect all the speakers and set up the system properly in order to enjoy the Home Cinema experience.
1Place the FRONT Left and Right speakers at equal distances from the TV and at a
2Place the CENTER speaker above or below the TV to localize the sound.
3Place the REAR (Wireless) speakers at normal listening ear level behind the listening position.
4Place the Subwoofer on the floor, near the TV.
1 | 4 Subwoofer | 2 |
Center Speaker | ||
Front
Speaker
(Left)TV
VIEWING AREA
1 |
Front
Speaker
(Right)
3 | Wireless |
Rear Speaker | |
3 To Change the On-Screen Language
✄
1
DVD POWER | STOP | SETUP |
| ||
|
|
Confirm that “QUICK” is selected.
QUICK SETUP
PLAYER MENU | ENGLISH |
TV ASPECT | 4:3 LETTER BOX |
4 Playback
ENTER
2 |
|
Confirm that “PLAYER | |
MENU” is selected. | |
| ENTER |
QUICK SETUP |
|
PLAYER MENU | ENGLISH |
TV ASPECT | 4:3 LETTER BOX |
3
or
ENTER
Select the desired language for the
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
4To exit the menu.
SETUP
Before:
¡Turn on the TV, amplifier and any other equipment which are connected to this player. Make sure the TV and audio receiver (commercially available) are set to the correct channel.
1Press [DVD POWER] to turn on the DVD/CD Player.
2Insert a disc with label facing to the left (facing up for horizontal installation).
3Press [PLAY B] to start playback.
4Press [STOP C] to stop playback.
5AM /FM Radio
Preset Radio Stations
1
3
4
DVD POWER | DVD | AMP POWER |
| TUNER | |
|
| DISPLAY |
1 | 2 | 3 |
|
| AUDIO |
4 | 5 | 6 |
|
| SUBTITLE |
7 | 8 | 9 |
CLEAR |
| ANGLE |
| 0 | +10 |
SEARCH | PAUSE | SKIP |
MODE |
PLAY
STOP
2
1 Press [AMP POWER] to turn on the AV Receiver.
2 Press [TUNER] to select Tuner mode. The current radio frequency (station number) will appear on the display. 3 Press [REPEAT/BAND] to select FM or AM.
4 Use [TUNING o / p] to select the station you want to preset.
5 Press [SETUP] for 1 second. Preset number will flash.
6 Use [SKIP H / G] and select a preset number, then press [SETUP]. (See page 21 for more details.)
Selecting Radio Stations
1 | Press [AMP POWER] to turn on the AV Receiver. |
| |
2 | Press [TUNER] to select Tuner mode. The current radio frequency (station number) will appear on the display. |
| |
3 | Press [REPEAT/BAND] to select FM or AM. |
|
|
4 | Use [SKIP H / G] to select a preset radio station. |
| |
5 | Use [TUNING o / p] to change the radio frequency. |
| |
6 | Press and hold [TUNING o / p] for 2 seconds for search mode. The next available station will be tuned. | EN | |
| (See page 21 for more details.) | – 27 – | |