Sylvania SCR2608 operating instructions After setting the alarm time, To Wake UP to Alarm Buzzer

Page 13

ALARM TIME SETTING

1.While in the CD or Radio mode, Press “Display/AL.Set” one time to enter the alarm time set mode. (The bell icon “” will appear and begin to flash)

2.Press and hold MEMORY/C- ADJ button for 2 seconds, enter to alarm hour adjustment mode (Alarm hour will begin to flash)

3. Press SKIP >> or SKIP << button to desired time. (e.g. 10:27pm -> 9:27am)

Press MEMORY/C-ADJ button, enter to alarm minute adjustment mode. ( Alarm minute will begin to flash)

Press SKIP >> or SKIP << button to desired time. (e.g. 9:27am -> 9:20am) and then press MEMORY/C-ADJ button, finish clock adjustment.

After setting the alarm time.

TO WAKE UP TO ALARM BUZZER:

a.Press AL.SET KEY (on the remote controller) repeatedly to select Buzzer mode. (“BUZZ” indicator will appear)

b.The alarm buzzer will sound for 3 minutes at the set alarm time.

c.Press Power/AL.Off button to turn off the alarm when it sounds.

Image 13
Contents Under Cabinet CD Clock Radio with Remote Safety Instructions Safety Certification Laser Safety Location of Controls Remote Control Under Cabinet Mounting Instructions Mounting template Mounting Procedure Power Wire Holder Battery Safety Precautions Connect the power cable plug to the 120V wall outletBattery Backup Clock Setting To Wake UP to Alarm Buzzer After setting the alarm timeTo Wake UP to Radio To Wake UP to CDSnooze Function Sleep FunctionMute VolumeListening to the Radio Radio Section Radio Reception Playing a CD Operation of CD PlayerSearching Tracks Skipping TracksProgrammed Playback Repeat PlayCare and Maintenance Caring for Compact Discs Troubleshooting GuideCleaning the Unit