Apple MMC-96IRS manual System reset

Page 22

System reset

If your cradle fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.

1.Press the On / Standby button to switch on the cradle.

2.Press and hold the Menu button so that the display shows “Set Brightness” on the lower line of the text display.

3.Press and release the Fast-forward or Rewind buttons until the display shows “System reset”.

4.Press and release the Select button. The display will show “Press SELECT to reset”.

5.Press and release the Select button again to confirm the reset operation.

6.Your cradle will be switch off and in standby mode, press the On / Standby button to switch it on.

7.After a system reset, the display brightness settings will have been set to their default values.

In case of malfunction due to electrostatic discharge, reset the product using the above procedure. In some circumstances it may be necessary to disconnect and then reconnect the mains power in order to resume normal operation.

21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents MMC-96iRS Page Contents Controls and connections front Controls and connections side Controls and connections rear Controls and connections Top Controls remote control IPod docking Docking your iPod by dock adapter Docking your iPod by dock adjuster Playing a folder on your iPod Navigating your iPodUsing SD cards or USB memory devices Inserting and removing memory devicesTo skip to another track Playing MP3 / WMA folders SD / USBSelecting a folder To seek forward or backward within a trackRepeat one folder Repeat cancelRepeat a single track Repeat all foldersRepeat in iPod mode Random one folder Random cancelIntro Random all foldersShuffle in iPod mode Volume control Sleep function Inactive brightness control System reset Software version Mute functionLine-out jack Headphone jackRS232 possibilities Page Specifications Circuit Features Power Requirements
Top Page Image Contents