Apple MMC-96IRS manual Inactive brightness control

Page 21

Inactive brightness control

The brightness of the display when the unit is in switch-on mode may be adjusted. If you use the unit in the bedroom, you may prefer a lower standby brightness level than the standard setting.

1.Press the On / Standby button to switch on the cradle.

2.Press and hold the Menu button so that the display shows

“Set Brightness” on the lower line of the text display.

3. Press and release the Select button to show the current setting.

4.Press and release the Fast-forward or Rewind buttons to change the inactive brightness level. The backlight level will change at the same

time so that you can see the effect of the change.

5. Press and release the Select button to save the new setting.

The default setting after a system reset is 5. Possible brightness values range from 1 - 7.

GB

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MMC-96iRS Page Contents Controls and connections front Controls and connections side Controls and connections rear Controls and connections Top Controls remote control IPod docking Docking your iPod by dock adapter Docking your iPod by dock adjuster Navigating your iPod Playing a folder on your iPodInserting and removing memory devices Using SD cards or USB memory devicesSelecting a folder Playing MP3 / WMA folders SD / USBTo skip to another track To seek forward or backward within a trackRepeat a single track Repeat cancelRepeat one folder Repeat all foldersRepeat in iPod mode Intro Random cancelRandom one folder Random all foldersShuffle in iPod mode Volume control Sleep function Inactive brightness control System reset Mute function Software versionHeadphone jack Line-out jackRS232 possibilities Page Power Requirements Specifications Circuit Features
Top Page Image Contents