Pioneer DEH-P7750MP Adjusting initial settings, Setting the clock, Setting the FM tuning step

Adjusting initial settings
1
Initialsettings lets you per form initial setup of
differentsettings for this unit.
1Functiondisplay
Showsthe function status.
1 PressSOURCE and hold until the unit
turnsoff.
2 PressMulti-Control and hold until the
clockappears in the display.
3 TurnMulti-Control to select one of the
initialsettings.
TurnMulti-Control clockwise to switch be-
tweenthe functions in the following order:
Clock(clock)FM step (FM tuning step)
AMstep (AM tuning step)Warning tone
(warningtone)AUX (auxiliary input)
Dimmer(dimmer)Brightness (bright-
ness)SWcontrol (rear output and subwoo-
fercontroller)Mute (telephone muting/
attenuation)Demonstration(feature demo)
Reversemode (reverse mode)Ever-scroll
(everscroll)
Usethe following instructions to operate each
particularsetting.
#Tocancel initial settings, press BAND.
Setting the clock
Usethese instructions to set the clock.
1 UseMulti-Control to select Clock.
Clockappears in the display.
2 PushMulti-Control left or right to select
thesegment of the clock display you wish
toset.
PushingMulti-Control left or right will select
onesegment of the clock display:
HourMinute
Asyou select segments of the clock display
thesegment selected will blink.
3 PushMulti-Control up or down to set
theclock.
PushingMulti-Control up will increase the
selectedhour or minute. Pushing
Multi-Controldown will decrease the se-
lectedhour or minute.
Notes
!Youcan match the clock to a time signal by
pressingMulti-Control.
Ifthe minute is 0029, the minutes are
roundeddown. (e.g., 10:18 becomes
10:00.)
Ifthe minute is 3059, the minutes are
roundedup. (e.g., 10:36 becomes 11:00.)
!Evenwhen the sources are off, the clock dis-
playappears on the display.
Setting the FM tuning step
TheFM tuning step employed by seek tuning
canbe switched between 100 kHz, the preset
step,and 50 kHz.
Initial Settings
En
48
Section
11