Pioneer DEH-P7750MP Adjusting loudness, Using subwoofer output

3 PushMulti-Control up or down to ad-
justthe level.
Eachpushing Multi-Control up or down in-
creasesor decreases the selected bass or tre-
blelevel. +6 6is displayed as the level is
increasedor decreased.
4 TurnMulti-Control clockwise to select
Bass(bass and treble frequency adjust-
ment).
Bassappears in the display.
#Ifthe treble frequency has been previously ad-
justed,Treble will be displayed.
5 PushMulti-Control left or right to select
thedesired frequency.
Eachpushing Multi-Control left or right se-
lectsfrequencies in the following order:
Bass:4063100160 (Hz)
Treble:2.5k4k6.3k10k (Hz)
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 UseMulti-Control to select LOUD.
LOUDappears in the display.
2 PressMulti-Control to turn loudness
on.
Loudnesslevel (e.g., Mid) appears in the dis-
play.
3 PushMulti-Control left or right to select
adesired level.
Eachpushing Multi-Control left or right se-
lectslevel in the following order:
Low(low)Mid (mid)High (high)
4 Toturn loudness off, press
Multi-Controlagain.
OFFappears in the display.
Using subwoofer output
Thisunit is equipped with a subwoofer output
whichcan be turned on or off.
1 UseMulti-Control to select Sub-W1.
Sub-W1appears in the display.
#Youcan also select the subwoofer setting
menuby pressing SW on the unit.
#Whenthe subwoofer controller setting is
Preout:FULL, you cannot select Sub-W1.
2 PressMulti-Control to turn subwoofer
outputon.
Normalappears in the display. Subwoofer out-
putis now on.
#Toturn subwoofer output off, press
Multi-Controlagain.
3 PushMulti-Control left or right to select
thephase of subwoofer output.
PushMulti-Control left to select reverse
phaseand Rev. appears in the display. Push
Multi-Controlright to select normal phase
andNormal appears in the display.
Adjusting subwoofer settings
Whenthe subwoofer output is on,you can ad-
justthe cut-off frequency and the output level
ofthe subwoofer.
1 UseMulti-Control to select Sub-W2.
Sub-W2appears in the display.
#Youcan also select the subwoofer setting
menuby pressing SW on the unit.
#Whenthe subwoofer output is on, you can se-
lectSub-W2.
2 PushMulti-Control left or right to select
cut-offfrequency.
Eachpushing Multi-Control left or right se-
lectscut-off frequencies in the following order:
50Hz80Hz125Hz
Audio Adjustments
En 45
English
Section
10