VCR O P E R AT I O N S
Basic Recording
You can record a TV show in progress by inserting a blank tape and pressing the REC button.
You can even add time in
Note
Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape. Warning: Do not cover this opening unless you are sure you want to record over the tape.
Before You Begin...
-Power on the
-Power on the TV
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.
If you wish to protect a cassette, break off the tab using a small screwdriver.
To
Recording
1
Insert a blank VHS tape into the VCR deck.
Make sure the tape is long enough to record the entire program.
Press the SPEED button to set the record speed.
(See page 80)
2
Use the Number buttons or the CH or buttons to select the desired channel, or press the INPUT SEL. button to select Line 1 or 2 if recording from an external device connected to the front or rear jacks, respectively.