How to Set a Timer Recording
MAIN MENU
|
|
|
|
|
|
|
|
|
DVD |
| VCR |
| Option |
| Language | ||
Program | Clock | Channel | Exit |
Set Timer Recording
RETURN $❷!!➛!!!❿ 
ENTER
CH START END DATE SPD
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
_ _ _ : _ _ _ : _ _ _ _ _ _ _
RETURN$❷!!➛!!!❿
Insert a blank tape with a Record Safety Tab into the VCR deck. The Timer Recording Feature allows you to program up to 8 events at a time to record up to a month in advance.
Set the TV to channel 3 or 4.
Before You Begin...
•Power on the
•Power on the TV
1Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button or press the TIMER button.
2Select “Program”
Using the up/down and left/right buttons, move the selection cursor to “Set Timer Recording,” then press ENTER to select.
3Select Channel Number
Press right and up/down buttons to set the channel. Press the right button to move to the next setting.
4Set “Time/Date/Speed”
Repeat step 3 to set start time, end time, date and record speed. Date can be set for one time, daily or weekly recording. See below.
5Save “Timer Recording”
Press the RETURN button to complete programming of the timer recording. Stop the VCR or turn the power off. The timer indicator comes on the VCR. The VCR will automatically turn on and begin recording at the time you set. To stop a timer recording, press the POWER button or STOP button on the VCR.
6Auto Speed Select
If you are not sure the tape is long enough for timer program recording in the SP tape speed, set the recording tape speed to “AUTO”. Recording starts in the SP tape speed. If the tape length is not long enough, the tape speed automatically changes from SP to SLP.
7Daily/Weekly Date Programming
Weekly [SUN’S~SAT’S]: You can record TV programs on the same channel at the same time every week.
Daily [MO ❿FR] : You can record TV programs on the same channel at the same time every day Monday through Friday.
The
You must follow the “Alt Video Out” instructions on page 31 to activate your alternative
1Connect S-VIDEO OUT to TV
Connect an
2Connect Component Video Out to TV
Connect a component video cable from the COMPONENT VIDEO OUT (Y, Pb, Pr) on the back panel of the
3Connect Audio Out (DVD only)
Connect RCA audio cables from the Left/Right Line Out jacks on the back panel of the DVD/VCR to the Left/Right Audio Line In jacks on your television.
•You must use these Line Out jacks when connecting the DVD- VCR to your TV with the
•Please refer to “Alt Video Out” on page 31 to activate your connection.
DVD Only |
1 |
To |
DVD Only |
2 |
To Component Video Input |
on Your TV |
DVD Only |
3 |
To Left/Right Audio Inputs |
on Your TV |
50
51