Samsung DVD-VR325 instruction manual Setting the Remote Control, Brand Codes

❚Setting the Remote Control

You can control part of another manufacturer’s TV functions with this remote control.

•Control function buttons involve : TV POWER, CH/TRK (/ ), VOL +/-, Direct number buttons,

TV MUTE, INPUT SEL.

Connections

To determine whether your television is compatible, follow the instructions below.

1.Switch your television on.

2.Point the remote control towards the television.

3.Press and hold the TV button and enter the two-figure code simultaneously corresponding to the brand of your television, by pressing the appropriate number button.

Brand	Codes	Brand	Codes
SAMSUNG	01,14,15,23,31	NEWSAN	27
DAEWOO	19	NOBLEX	25
EMERSON	21	PANASONIC	12,24
GRADIENTE	30	RCA	07,29
HITACHI	10	SANYO	05,20
JVC	11	SHARP	02,16,22
LG	06,08,18	SONY	03
LOEWE	28	TELEFUNKEN	26
MAGNAVOX	04	TOSHIBA	09
MITSUBISHI	13	ZENITH	17

Result: If your television is compatible with the remote control, it will switch off.

It is now programmed to operate with the remote control.

■ If several codes are indicated for your

	television brand, try each one in turn until you
Note
	find one that works. If you replace the remote
	control’s batteries, you must set the brand code
	again.

You can then control the television using the following buttons.

Button	Function
TV POWER	Used to switch the television on and off.
INPUT SEL.	Used to select an external source.
VOL +/-	Used to adjust the volume of the television.

CH/TRK (/) Used to select the desired channel.

TV MUTE	Used to toggle the sound on and off.
0~9	Used to input number directly.
100+	Used to select channels over 100.

	The various functions may not necessarily work
	on all televisions. If you encounter problems,
Note
	operate the television directly.

22 - English