Samsung DVD-VR325 Setting Up the Audio Options, Digital Output, Dynamic Compression

Setting Up the Audio Options

Allows you to setup the audio device and sound status settings depending on the audio system in use.

	With the unit in Stop mode/No Disc mode, press
1 the MENU button.
	Press the …† buttons to select Setup, then press
2 the ENTER or √ button.
		No Disc		Setup
		Setup System		√
		Timer Rec.	Clock Set	√
			Channel Set	√

❚Digital Output

1.PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs.

2.Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Outputs.

Be sure to select the correct Digital Output or no audio will be heard.

Note

❚DTS

1.Off : Doesn’t output digital signal.

2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.

S

	Language		√
	Audio		√
	Video		√
	Parental Control		√
MOVE	SELECT	RETURN	EXIT

Note

When DTS soundtrack is played, sound is not output from Analog Audio Output.

ystem Setup

Press the …† buttons to select Audio, then press
3 the ENTER or √ button.
Audio setup menu will be displayed.
	No Disc				Audio
	Setup	Digital Output		: PCM	√
		DTS		: Off
	Timer Rec.				√
		Dynamic Compression		: On	√
	MOVE	SELECT	RETURN		EXIT

		Press the …† buttons to select the desired audio
4 option, then press the ENTER or √ button.
		Press the …† buttons to select the desired item,
5 then press the ENTER or √ button.
		■ Press the RETURN or œ button to return to the
	Note	previous menu.
		Press the MENU button to exit the menu.

❚Dynamic Compression

This is only active when a Dolby Digital signal is detected.

1.Off : You can enjoy the movie with the standard Dynamic Range.

2.On : When the Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

English - 29