Samsung DVD-TR520 instruction manual For DVD-VIDEO discs, For DVD-RAM/-RW/-R Disc

Playback

3	Press OPEN/CLOSE button to close the disc tray.
	• Your TWIN TRAY DVD RECORDER closes the
	disc tray and plays the disc automatically.
	• The TWIN TRAY DVD RECORDER does not
	play discs automatically after the initial power on.
	• When the TWIN TRAY DVD RECORDER is
	powered on and a disc is in the tray, the unit will
	be activated and wait in stop status.
	• Press the PLAY(	) button to start playback.
	• If you insert an MP3 Disc, your TWIN TRAY
	DVD RECORDER will display the file list on the
	screen and start playing.
	• If you insert a JPEG Disc, folders and files are
	displayed in the thumbnail picture.
	• If you want the unit to play automatically when it
	is powered on with a disc in the unit, power on
	with the PLAY(	) button.
4 Press the STOP(		) button to stop playback.

■When you stop playing back a disc, the TWIN TRAY DVD RECORDER remembers

NOTE

where you stopped, so when you press PLAY() button again, it will pick up where you left off. (Unless the disc is removed or the TWIN TRAY DVD RECORDER is unplugged, or if you press the STOP() button twice.).

	■	Do not move your TWIN TRAY DVD
		RECORDER while playing, as this may
Caution
		cause damage to the disc.

■Make sure to press the OPEN/CLOSE button to open or close the disc tray.

■Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction.

■Do not place foreign materials on or in the disc tray.

■Some functions may perform differently or be disabled depending on the disc type. If this occurs, refer to the instructions written on the disc case.

■Be especially careful that children's fingers are not caught between the disc tray and the tray chassis when it closes.

■You must only insert one DVD disc at a time. Inserting two or more discs will not allow playback and may cause damage to the TWIN TRAY DVD RECORDER.

Using the Disc Menu & Title Menu

Some type of discs contain a dedicated menu system that allows you to select special functions for title, chapter, audio track, subtitle, film preview, information on characters, etc.

For DVD-VIDEO discs

1	Press the DISC MENU button to enter the disc's
	menu.

• Move to the setup menu related to the playback operation.

• You can select the audio language and the subtitles provided by the disc.

2 Press the TITLE MENU button to move to the disc's title menu.

•Use this button if the disc contains more than one title.

Some type of discs may not support the title menu function.

For DVD-RAM/-RW/-R Disc

1 Press the TITLE LIST button to display title list.

	■	Title List : Title List is a list of previously
		recorded programs. If a title is
NOTE
		deleted, that title cannot be played
		again.

■Play List : This refers to a list of user-selected titles. When one playlist is played, only the scene selected by the user will play and then stop. Since only the information necessary for playing a desired scene is included in a playlist, even if that playlist is deleted, the original recording will not be deleted. (only VR mode)

44 - English