Setting the System
Select System in Settings.
¤Resume
●Use 
, 
to select Resume On or Off.
●On: Play back music from the part of music you listened last if you play it back again after stopping.
●Off: Play back music from the beginning of music if you play it back again after stopping.
¤Default vol
●Use 
,
to set the default volume from 0 to 30(Max).
●If the power is turned on again after having adjusted the volume above the default value, music is played at the default volume.
●If the power is turned on again after the volume was set to within the default value, the music is replayed at the previously played volume.
¤Tuner Region
●Use 
,
to select FM Tuner Region.
●Worldwide : Search FM frequency between 87.5MHz to 108.00MHz in the increase of 50 KHz.
●US : Search FM frequency between 87.5MHz to108.0MHz in the increase of 100 KHz.
●Japan : Search FM frequency between 76.0MHz to 108.0MHz in the increase of 100 KHz.
Setting the System
¤Tuner Level
● Use 
,
to select FM Tuner Sensitivity. ● The higher the FM Tuner Sensitivity,
the more frequency it can receive .
●High → Middle → Low
¤Default Set
●Use 
, 
to select Default Set Yes or No.
● Yes : All settings selected will be initialized.
● No : All settings selected will remain as they are.
¤About
●If you select About, you can check version information,
total number of tracks and remaining capacity.
42 | 43 |