Listening to Music with yepp
First, insert the battery and connect the earphones to the player.
Setting up Volume/Hold Functions
Adjusting the Volume
Playing Music
(Power On)
When you press the 
button, the yepp logo appears and a music/voice file is played.
Stopping Music
(Power Off)
When you press the 
button while playing, the music stops. If no buttons are pressed within 10 seconds (changes depending on settings), the yepp automatically powers off.
●You can also turn off the power by pressing and
holding the 
button on the main body.
Move the 
button on the side of the yepp
player to adjust the volume while playing.
Note :
●Volume ranges from 00 to 30.
●Press to adjust the volume by one level.
Press and hold to increase or decrease the volume in greater increments.
HOLD Function
Under Hold mode, buttons will not work.
NOR 0 0 : 0 1 : 3 0 | 0 0 1 |
|
NOR | 2 0 |
FREE MEMORY
114.37 MB
NOR 0 0 : 0 1 : 3 0
0 0 1
NOR | Get Original, Black Eyed |
NOR 0 0 : 0 1 : 3 0
0 0 1
NOR | Get Original, Black Eyed |
GOOD BYE 
Slide the | HOLD | switch on the player in the |
direction of the arrow.
❈When a button is pressed, “
HOLD!” message
will appear on the display.
NOR 0 0 : 0 1 : 3 0 | 0 0 1 |
NOR | 2 0 |
Note : ● WMA files can only be played at bit rates between 48Kbps and 192Kbps.
[supplied by Windows Media Player (Ver 8.0)] WMA files less than 48Kbps may not be played.
●Power off time can be set in the MENU mode.
32 | 33 |