Portable AM/FM Radio and CD Player | V10M10_IM_EN_12262006 |
OPERATIONAL INSTRUCTIONS
Listening to the Radio
Slide the FUNCTION SWITCH to the “RADIO” position. Slide the BAND SWITCH to the desired waveband. Turn the TUNING KNOB to your desired radio station. Adjust the sound level by rotating the VOLUME CONTROL KNOB. To turn off the radio, simply slide the FUNCTION SWITCH to “OFF” position.
Note: Radio frequency is shown on the LCD DISPLAY.
FM Stereo Indication
When tuned to a FM Stereo broadcast, the FM stereo indication will be shown on the LCD. In weak signal areas the FM stereo signal may not be strong enough and can cause excessive background noise. In this case, slide the BAND SWITCH to the “FM” position.
Antennas
For best reception, fully extend the FM TELESCOPIC ANTENNA to receive FM stations. For AM reception, the unit has a
Auxiliary (AUX) Mode
1.Slide the FUNCTION SWITCH to the “AUX” position.
2.Connect the earphone socket from the auxiliary unit (e.g. MP3 player or MD player) into
3.Play the auxiliary unit. Music from the auxiliary unit can be listened to through the speaker of this product.
Stereo Headphone Jack
For private listening, insert the plug of a stereo headphone into the STEREO HEADPHONE JACK and adjust the VOLUME CONTROL KNOB accordingly. During the use of a headphone, the speakers are automatically disconnected.
Bass Boost
For increased bass at all volume levels, push the BASS BOOST BUTTON to the “ON” position to boost the low frequency tone for an emphasized bass sound. To release the super bass, simply push the button again.
- 14 -www.jWIN.com