AC Operation, Installing the Batteries

Portable AM/FM Radio and CD Player

V10M10_IM_EN_12262006

GETTING STARTED

Location of Controls – Continued

1.	FUNCTION SWITCH (AUX/CD/OFF/RADIO)	13.	LCD DISPLAY
2.	BAND SWITCH (AM/FM/FM ST)	14.	STEREO HEADPHONE JACK
3.	FM TELESCOPIC ANTENNA	15.	VOLUME CONTROL KNOB
4.	CD DOOR	16.	AC SOCKET
5.	TUNING KNOB	17.	BATTERY DOOR (BOTTOM)
6.	BASS BOOST BUTTON	18.	AUX IN JACK
7.	CD SKIP/SEARCH FORWARD BUTTON	19.	SPEAKER LEFT
8.	CD SKIP/SEARCH BACKWARD BUTTON	20.	SPEAKER RIGHT
9.	CD PROGRAM BUTTON	21.	FOLDER BUTTON
10.	CD MODE BUTTON	22.	CD / SD / USB BUTTON
11.	CD STOP BUTTON	23.	USB PORT
12.	CD PLAY/PAUSE BUTTON	24.	SD / MMC SLOT

AC Operation

Before operation, please be sure that the voltage on the set corresponds to the voltage of your local area. Unravel the AC line cord, and insert one end into the AC jack on the set and the other end into a standard AC outlet.

Notes:

1)In case of malfunction due to electrostatic discharge (ESD), reset the unit by reconnecting the AC cord again to resume to normal operation.

2)When not in use – Unplug the AC power cord completely from the AC power socket.

Installing the Batteries

Disconnect the AC Cord Set completely. Open the BATTERY DOOR and insert eight “C” or

“UM-2” size batteries (not supplied) making sure that the indicated battery polarity is observed. When not in use – Remove all the batteries if the unit will not be used for several months or more.

- 7 -www.jWIN.com