Operation
COOL,HEAT and DRY operation
Recommendations: | Use COOL in summer. |
Use DRY in spring, autumn and in damp climate.
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display. (Not Timer setting)
Power indicator on indoor unit lights up.
(2) Select operation mode
Press MODE button. For each press, operation mode changes as follows:
AUTO COOL DRY FAN
Unit will run in operation mode displayed on LCD. Stop display at your desired mode.
(3) Select temp. setting
Press TEMR button.
Every time the button is pressed, temp. setting increases 1oC 
Every time the button is pressed, temp. setting decreases 1oC
Unit will start running to reach the temp. setting on LCD.
ON/OFF TEMP
6 | 1 | 3 | 3 |
MODE |
| SET | |
2 |
|
|
|
FAN |
|
| TIMER |
4 |
|
|
|
SWING |
| CLOCK | |
5 |
|
|
|
SLEEP |
|
| |
(4) Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
AUTO LO MED HI
LOCK 
RESET
COOL operation starts when room
Unit runs at the speed displayed on LCD.
In DRY mode, when room temperature becomes lower than temp.setting+2oC,unit will run intermittently
temp. is higher than temp. setting.
Temp. setting+2oC
Temp. setting
at LOW speed regardless of FAN setting.
On reaching temp. setting, unit will run in mild DRY mode.
Hints
On cooling only unit, heating mode is not available.
Remote controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status.
7