2.System Requirement and Installation
This device must be applied on USB specification products. And user should to confirm that PC operation supports USB function, USB 1.1 or 2.0.
No external driver installed
¾OS Support Win98SE, WinME, Win2000, WinXP, Mac OS 9.0 and 10.1 ¾System recommended use Intel PII 350 MHz or AMD K6 450 above
¾At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and WinXP)
¾For good sound quality, please adjust your system’s H/W acceleration and Sample rate conversion quality to Full and Best.
Note: Some USB Host Controller may have problem with data stream package loss, this will influence output audio data and make some discontinuous sound. But this is very rare.
Sometime, when user plug USB speaker on PC system and OS cannot auto change audio device to USB audio, please switch the audio device to USB audio sound and audio devices properties in control panel.
3