7. FAQ & Technical Support
Q1 Why play CD without sound ?
Most general case was digital CD playback function did not open. Because USB audio is digital signal, it is use different path to process CD music with traditional analog CD.
You should open “Device Manager”, select “DVD/CD ROM drives” and open it. Then switch to “properties” page and enable digital CD audio.
Q2 Why sometimes Win98SE and WinME can not auto detect USB audio device and switch?
Since Win98SE and Win ME have different driver architecture with Win2000 and WinXP. When users plug in/out USB audio device too much time or faster, these two OSs may not detect the change on device. So, sometimes user got to switch audio device to USB audio device by them self.
While user plug in USB audio device on Win98SE and WinME system, if system cannot switch audio device to USB, please open “Control Panel”, select “Sounds
17