Microsoft E60, TC4100, LC2000, TC3100, E800 Frequently Asked Questions, Installing RC, Booting RC

8. Type exit when done troubleshooting.

Installing RC

1.Insert Small Business Server 2000 CD-ROM. If CD-ROM auto-start is enabled, click exit to close the applet.

2.Open a command prompt and type D:\I386\WINNT32 /CMDCONS and press Enter. (Where

D:is the CD-ROM drive letter.)

3.Follow the screen instructions to complete the RC installation.

Booting RC

1.Shutdown and Restart system.

2.Select "Small Business Server 2000, Recover Console" from the boot menu.

3.The system will display a menu asking to select the instance of the NOS you want to boot. For example it displays:

1: C:\WINNT

4.Type 1 and press Enter.

5.Type the administrator password when prompted.

6.At the command prompt type help and proceed to achieve your objective.

7.Type exit when done troubleshooting.

NOTE: The file access security can prevent you from getting to files.

Tip #8. Terminal Server Service is only supported on the L Series NetServers

Terminal Server Service is only support the NetServer L Series.

Frequently Asked Questions

Question: What NetServer BIOS version do I need to run Small Business Server 2000?

Answer: Table 5, provided in the appendix of this document provides a list of NetServer and BIOS versions used to test with Small Business Server 2000. HP recommends that you use the version provided in this table or a later release.

Question: What HP Disk Array BIOS/Firmware version do I need to run Small Business Server 2000?