Microsoft LC2000, TC4100, E60, TC3100, E800 manual Recovery Console RC Boot

Models: E800 TC3100 E60 LC2000 TC4100

1 22
Download 22 pages 13.99 Kb
Page 16
Image 16

2.Networking disabled. Includes networks services and drivers.

3.Directory services restore mode. Brings system up with directory services disabled with the intent of recovering active directory. Safe mode boot is guided by the registry key hklm\CurrentControlSet\Control\SafeBoot with the use of the Minimal and Network subkeys. The IOManger and service control manager looks at the resgistry to load the driver and services. This way it will avoid loading a problematic driver or service.

4.Command prompt. Provides an alternate command shell CMD.EXE instead of the explorer. This is dictated by the registry key hklm\system\CurrentControlSet\Control\SafeBoot\AlternateShell

There is a Safe-Mode boot loophole. Since NTLDR loads "Boot Load" drivers, these drivers bypass the IO Manager's safe Mode check.

Recovery Console (RC) Boot

Recovery Console can be used when safe boot fails. You can enter RC in two ways booting from Small Business Server 2000 CD-ROM or by installing the recovery console boot on your system.

It is recommended to install the recovery console (RC) immediately after installing Small Business Server 2000.

Start RC Booting from Small Business Server 2000 CD-ROM

If you have a need of booting the Small Business Server 2000 recovery console but this feature is not installed on the system, use the following procedure to boot the RC from the Small Business Server 2000 CD-ROM.

1.Insert the Small Business Server 2000 CD-ROM and start the reboot sequence.

2.Press any key when prompted to start booting from the Small Business Server 2000 CD- ROM.

3.Press F10 at the "Welcome to Setup" screen.

NOTE: This is an undocumented option. The bottom of the display is asking you to press Enter, R or F3.

4.The system will display a menu asking to select the instance of the NOS you want to boot. For example it displays:

1: C:\WINNT

5.Type 1 and press Enter.

6.Type the administrator password when prompted.

7.At the command prompt type help and proceed to achieve your objective.

Page 16
Image 16
Microsoft LC2000, TC4100, E60, TC3100, E800 Recovery Console RC Boot, Start RC Booting from Small Business Server 2000 CD-ROM