PCS-G50 and PCS-G70 Video Communication Systems

OPERATION FAQ

Q.How do I edit Phonebook data on the PC?

A.Use Phonebook edit software, which can be downloaded from: http://www.sony.com/videoconference

Refer to the operation manual.

Q.Where can I get a list of service commands?

A.Service Commands are listed in the Release Notes and are available from: http://www.sony.com/videoconference

Q.How do I check call status?

A.Press 00 on the remote commander during the communication and you will be taken directly to the Communication Status page in the menus. Press 0 again to clear the menu.

Q.How do I get to the administrator setup menu on the GUI?

A.Press and hold the menu button on the remote commander for five seconds, or push the 9 button twice.

Refer to the release notes for a list of keyboard shortcuts.

Q.Can I customize the menu screen?

A.Yes. The launcher screen of the PCS-G50/G70 can be customized from the menu settings. The background pattern can be selected from four graphic patterns.

Q.Can the start up logo be changed?

A.Yes. Detailed instructions are available from:

http://www.sony.com/videoconference, “How to Change the startup logo screen”

TROUBLESHOOTING FAQ

Q.I cannot see near-PC images.

A.PCS-G50/G70 can output far-site PC images from RGB output on the communication terminal and from RGB output on the DSB. However, near-site PC images can be output from the RGB output on the DSB only.

FAQ

11

Page 17
Image 17
Sony PCS-G70 manual Operation FAQ, Troubleshooting FAQ