Trouble Shooting…
Problem
No Sound
No Sound from one speaker
One speaker sounds distorted, lower volume or “different”
Treble or Bass
Please Check
Check the speakers are connected to the cable correctly.
Check the speaker cable is connected to the receiver amplifier correctly.
Check the receiver amplifier is powered “on” at the mains, is not on “mute”, has no headphones attached and that the Channels used for the exterior speakers (usually A or B) is in operation.
Refer to the owners guide that came with your receiver amplifier.
Most initial problems are connectivity, please try a different connection cable to your outdoor speakers or equipment.
Check the “balance” control on your receiver amplifier.
Check all connections and cable to the inoperable speaker.
1.Disconnect the “working” speaker from the receiver amplifier connection/ channel. Switch the cord from the
2.Reconnect as original. Remove the speaker cable at the “working” speaker directly and connect it directly to the
3.If the speaker still does not work the problem is the speaker.
Follow same procedure as above for “No Sound”.
Check the “tone” setting on your receiver amplifier. Adjust the Treble and Bass settings on your receiver amplifier.
Check the connections carefully from the amplifier to your speakers and ensure correct Phase (+ to + and
–to – accordingly). Poor sound replication is expected from a speakers or speakers out of polarity or phase.
