Label Film
3.3. Label-, Artwork- and Print Films
For unmistakeable reference during produc- tion the catalogue number must be indica- ted on each film outside of the print area for identification.
I. Label Film
Usually a graphic or picture will be used for the front side. For clear identification of the final MD it is necessary to include the catalogue number on the label. The MD Logo shall not be inserted, as it al- ready appears on the upper cartrigde.
During preparation of the label films please mind the following:
•Send coated positive offset films with approx. 3 mm bleed only.The registration and cutting marks must be located outside the bleed.
•The films must not reveal damage of any kind and must be packed in such a way so as to prevent folding or creasing (roll container or carton).
•In order to match label and artwork please en- close compulsory proofs regarding colour with all films.
•Please identify each film with colour specifcation.
All dimensions in mm with a tolerance of ± 0.2 mm
54.7
63.8
R = max. 0.7 mm for all 4 corners
Direction of Texture or Paper Grain
Upper Cartridge
In order to ensure optimum reliability under a variety of different operating and storage conditions DADC uses special paper quality.
DADC 19
A U S T R I A