Backline Card
II. b) Artwork Films (Backline Card)
The backline card contains similar information as CD backline cards (eg.: artist, disc title, catalogue no.). The MiniDisc logo (recommended size 7mm) has to be inserted on both spines of the backline card, so that it can be easily read at top of the spine end if the MD is stored upright in a rack (see drawing below).
During preparation of the print films for the backline card please mind the following:
•Send coated positive offset films with approx. 3 mm bleed only, the registration and cutting marks must be located outside the bleed.
All dimensions in mm with a tolerance of ± 0.2 mm
•The films must not reveal damage of any kind and must be packed in such a way so as to prevent folding or creasing (roll container or carton).
•The catalogue number must appear on the backline card.
•Please enclose compulsory proofs regarding colour with all films.
•Please mark each film emulsion side with the colour.
•Spine printing should be upright reading when cover up.
103.2
| 108.8 |
|
1 |
|
|
| ARTIST AND TITLE |
|
ARTIST AND TITLE | Direction of Texture or Paper Grain | ARTIST AND TITLE |
| ||
2 |
| 3 |
11.2 | 86.4 | 11.2 |
MD Logo: 1 , 2 ... on this spine you can choose between position 1 or 2 .
3.......... on the backside placement and position of a MD Logo is optional.
DADC will provide artwork in following quality:
DADC 21
A U S T R I A