Haier FCD-JTHA40-III, FCD-JTHA50-III, FCD-JTHA60-III instruction

Setting Environment

Do not set it at place where is too cold and

Do not set at outdoor places.

may freeze.

Do not use as floorstanding appliance.

Please mount it to firm and reliable wall.

² »Ò ª° ×² °Ó ÚÎ Þ· Å¨ ËÅ ®µ Äµ Ø· ½

Installation

Installation must be made by installers of or designated by our company after-service department. The water heatershall be wall-mounted.

Before installation, make sure water heater rear wires are fit firmly. Determine an installation location. Make four holes 12mm, 65 mm deep in the wall with an impact drill according to installating dimension. Insert fixexpansion hooks and expansion bolts in corresponding wall holes. Lift the water heater. Insert wall rack onto the hooks and bolts. Fit flat washers, rear wires and nuts in turn onto the bolts (see Figure 2). Tighten the nuts and check them firm. Install accessories such as safety valve, drain hose as shown in Figure 3. Use sealing compound to prevent water leakage.

To facilitate installation and removal, it is suggested a G 1/2" movable nut is fitted at appropriate locations on inlet and outlet pipes respectively. Find water supply location. Connect inlet pipe, outlet pipe and city water pipe respectively to the use point.

The hot water pipe shall not be too long to reduce the heat losses.

Please reserve some space in installation for the future maintenance.

	In case connecting water heater with water drain
Do not install to places without sewer.	hose, connect the drain hose to the inlet of the
Do not install to places without sewer.

Hot water outlet valve

	Hot
	water
	outlet
	Cold water inlet
Cold water	Shower head
outlet valve	Shower head
Mixing valve

Safety valve

sewer to avoid polluting by splashing.

The original pipeline of the water heater is an organic part of "Safe Care". Do not remove it by yourself. Otherwise we will not take responsibility for the injure and loss caused by the safety trouble occurred therefrom.

Description of the Symbols

Never do that

Be sure to act as per instructions

(Figure 2)(Figure 3) for reference in installation only

Connection and use of safety valve:

The safety valve should be connected to the cold water inlet pipe. Please check carefully if the direction is correct after installation. The correct direction of installation is that the arrowhead on the safety valve should point to the water heater.

Please connect the drain hose to the safety valve. Connect one end of the hose to the safety valve vent and the other end to the sewage drain. The hose can be cut short or extended as necessary. The hose shall be installed as inclined downward.(see to Figure 4)

FCD JTHA40-III(E), FCD-JTHA50-III(E), FCD-JTHA60-III(E), FCD-JTHA40-III, FCD-JTHA50-III, FCD-JTHA60-III specifications

Haier, a renowned global leader in home appliances, has made significant strides in the air conditioning market with its FCD-JTHA series. This series includes multiple models: FCD-JTHA40-III, FCD-JTHA50-III, FCD-JTHA60-III, FCD-JTHA40-III(E), FCD-JTHA50-III(E), and FCD-JTHA60-III(E). Each model is designed to meet the varying needs of consumers, providing efficient and reliable cooling solutions for a variety of spaces.

One of the primary features of the FCD-JTHA series is its advanced inverter technology. This technology allows the units to adjust their compressor speed based on the current temperature, leading to increased energy efficiency and reduced electricity bills. By operating at optimal levels rather than on/off cycling, these models achieve consistent comfort with minimal energy consumption.

Another notable characteristic is the high energy efficiency rating. The units are designed to consume less power, making them environmentally friendly while also appealing to budget-conscious consumers. This efficiency is complemented by a robust cooling capacity, ensuring quick and effective temperature control even in larger rooms.

The FCD-JTHA series also incorporates innovative air filtration systems. These systems utilize advanced filters that capture airborne particles, allergens, and pollutants, promoting better indoor air quality. The filters are easy to access and clean, enhancing overall maintenance convenience for users.

Additionally, these models are equipped with a range of smart features. They come with Wi-Fi connectivity, allowing users to control the unit remotely through a mobile app. This functionality enables individuals to adjust settings, monitor energy usage, and receive maintenance reminders right from their smartphones, providing enhanced convenience and control.

Furthermore, the series includes various operational modes, such as cooling, dehumidifying, and fan modes, which allow for versatility in different weather conditions. The quiet operation feature ensures that these units function silently, providing comfort without disturbing the peace of your home.

In summary, the Haier FCD-JTHA series exemplifies a perfect blend of energy efficiency, advanced technology, and user-friendly features. With models catering to varying capacities, consumers can find the perfect unit to suit their specific needs. Whether for residential or commercial applications, these air conditioning systems are designed to provide reliable cooling while prioritizing comfort and sustainability.