Setup
Preparation
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the AC power supply cord after all other connections are complete.
ENGLISH
Setup
∫Wireless setup diagram
e.g.
Main room
Home theater unit
Wireless sound |
|
system | Other room |
Place the wireless sound system within approximately 30 m (98 ft) from the home theater unit.
[Note[
≥Do not use the wireless sound system and digital transmitter in a metal cabinet or bookshelf.
≥Depending on your wall thickness and material, the operating range may be reduced.
≥You can use up to 3 wireless sound systems at the same time, in different rooms.
To avoid interference, maintain the following distances between the wireless sound system and other electronic devices that use the same radio frequency (2.4 GHz band).
Wireless sound system |
| Wireless LAN: |
|
| approx. 2 m |
|
|
|
Cordless phone and other electronic devices: approx. 2 m
The wireless sound system will automatically seek a clear channel if any of these other devices interfere with its communication.
When this happens, the wireless link indicator [e.g. “ [W2] ”
This is the normal operation of the product working to assure the best possible performance of your home theater unit.
If the interference persists, try moving the other devices to another location outside the range of the wireless sound system, or move the wireless sound system nearer to your home theater unit.
Connections
RQTX0051
4
∫ Digital transmitter | ∫ AC cord |
Refer also to the operating instructions for your home theater unit.
Do not insert or remove while the home theater unit is on.
Insert fully until you hear a click.
e.g. Rear of the home theater unit
≥For users using the SH-FX65T transmitter
DIGITAL | card, replace it with the | |
your | ||
TRANSMITTER |
dry place for later use.
Raise the antenna mast for best reception.
To household AC outlet (AC 120 V, 60 Hz)
AC IN
AC power supply cord