Introduction, Control Elements and Connections

ULTRABASS BA810

1. INTRODUCTION

Thank you for expressing your confidence in our products by purchasing the BEHRINGER ULTRABASS BA810. The BA810 is a premium, unusually powerful bass cabinet that was specially developed for deep and responsive sound reproduction.

The special BUGERATM aluminum cone speakers used in the BA810 guarantee amazingly direct attack and impulsive bass. Add to that the unbelievable power of 2,000 Watts, the outstanding workmanship and good tranpsortability thanks to the integrated rollers. All these characteristics make the ULTRABASS BA810 an absolutely high-value, dependable companion on the stage, in the studio or in your practice room.

1.1 Shipment

The BA810 was carefully packed at the assembly plant to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage.

+Damaged equipment should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery. Otherwise, all claims for replacement/repair may be rendered invalid.

+To assure optimal protection of your ULTRABASS during use or transport, we recommend utilizing a carrying case.

+Never let unsupervised children play with the ULTRABASS or with its packaging.

+Please dispose of all packaging materials in an environmentally friendly fashion.

1.2 Initial operation

Connect the ULTRABASS BA810 to a power amplifier using the speaker connectors located in the back.

+Please make sure to completely lower the volume on your amp before connecting it to the BA810.

1.3 Warranty

Please take a few minutes and send us the completely filled out warranty card within 14 days of the date of purchase. You may also register online at www.behringer.com. The serial number needed for the registration is located in the back of the unit. Failure to register your product may void future warranty claims.

2.CONTROL ELEMENTS AND CONNECTIONS

Fig. 2.1.: Control elements and connections

You can connect a footswitch (e.g. MIDI FOOT CONTROLLER FCB1010) to this 1/4" TS connector to remotely enable/disable the tweeter. When the tweeter is enabled, you get a harder, more direct sound (Hard Attack). When the tweeter is disabled, the entire sound spectrum is reproduced only on the bass speakers (Soft Attack).

The loudspeakers of the ULTRABASS series feature a 1/4" TS connector in the INPUT/LINK section as well as two professional speaker connectors (compatible with NEUTRIK® SPEAKON®). All connectors are wired in parallel, which means that all three connections are identical in their function. Therefore, you can connect a second speaker to the link connector output without going directly to the amplifier. This way, you can utilize short cables and will require no additional connectors on your amp.

+Connecting several ULTRABASS cabinets via the link connector reduces the input impedance: if you connect two identical speakers, the impedance is reduced to one half of the original value, with three speakers to a third, and so on. Therefore, always keep in mind the impedance value of your amplifier to avoid causing damage by overloading. Ideally, the impedance of your speakers corresponds to the impedance of your amplifier. If the speaker has a higher impedance than the amplifier, this will have no negative consequences on the amp, but it won’t be able to pass its full power to the speaker. See chapter 4. “INSTALLATION” for more information.

+Attention! Never connect two amps to one BA810. Otherwise, you may destroy both your amps and your speakers.

This table shows the correct polarity of the connectors:

Plus pole (POS) = Tip (TIP) on the stereo jack or 1+ on the professional speaker connector.

Minus pole (NEG) = Sleeve (SLV) on the stereo jack or 1- on the professional speaker connector.

+Please observe the illustrations 4.1 and 4.2.

SERIAL NUMBER. Please take a few minutes and send us the completed warranty card within 14 days of the date of purchase; failure to do so may void future warranty claims. You may also register online at www.behringer.com.

2. CONTROL ELEMENTS AND CONNECTIONS

BA810 specifications

The Behringer BA810 is a versatile and powerful active loudspeaker designed to deliver high-quality sound performance for a wide range of applications. With its robust construction and advanced technology, the BA810 is suitable for musicians, DJs, and sound engineers who demand reliability and excellent audio quality.

One of the standout features of the BA810 is its 8-inch low-frequency driver, which provides deep and punchy bass response. This driver is paired with a 1.35-inch titanium compression driver that ensures clear and crisp high frequencies, making the speaker suitable for both music playback and vocal applications. The combination of these drivers allows the BA810 to deliver a balanced sound across the frequency spectrum, making it ideal for live performances, rehearsals, and events.

The Behringer BA810 boasts a powerful built-in amplifier with a peak power output of 1,000 watts. This ensures that the speaker can achieve high sound pressure levels while maintaining clear audio quality. The amplifier features state-of-the-art technology, including a sophisticated protection circuit to prevent overheating and overloading, ensuring the longevity and reliability of the speaker.

Portability is another key characteristic of the BA810. The speaker is lightweight yet ruggedly constructed, making it easy to transport to gigs or events. Its compact design allows for easy setup in various configurations. Additionally, the molded enclosure design helps minimize distortion and improve sound clarity, which is especially important in live sound scenarios.

The BA810 also features multiple input and output options, including XLR and 1/4-inch TRS inputs, allowing for easy connectivity with a range of audio sources. The speaker is equipped with an integrated mixer, enabling users to connect microphones, instruments, or other devices directly without the need for additional equipment.

Overall, the Behringer BA810 is a powerful and flexible active loudspeaker that offers exceptional sound quality and durability. Its unique combination of advanced features, portability, and ease of use make it an excellent choice for musicians, performers, and sound professionals looking for a reliable solution for their audio needs.